Garmin Fenix5x Kullanıcı El Kitabı - Sayfa 9

İzle Garmin Fenix5x için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Fenix5x 42 sayfaları.

Sayfayı Yazdır

Select the activity settings.

Select Metronome > Status > On.

Select an option:

• Select Beats / Minute to enter a value based on the

cadence you want to maintain.

• Select Alert Frequency to customize the frequency of the

beats.

• Select Sounds to customize the metronome tone and

vibration.

If necessary, select Preview to listen to the metronome

feature before you run.

Hold DOWN to return to the clock.

Go for a run

(Starting an Activity, page

The metronome starts automatically.

During your run, select UP or DOWN to view the metronome

screen.

If necessary, hold MENU to change the metronome settings.

Jumpmaster

The jumpmaster feature is for use by experienced skydivers

only. The jumpmaster feature should not be used as a primary

skydiving altimeter. Failure to input the appropriate jump related

information can lead to serious personal injury or death.

The jumpmaster feature follows military guidelines for

calculating the high altitude release point (HARP). The device

detects automatically when you have jumped to begin navigating

toward the desired impact point (DIP) using the barometer and

electronic compass.

Multisport

Triathletes, duathletes, and other multisport competitors can

take advantage of the multisport activities, such as Triathlon or

Swimrun. During a multisport activity, you can transition

between activities and continue to view your total time and

distance. For example, you can switch from biking to running

and view your total time and distance for biking and running

throughout the multisport activity.

You can customize a multisport activity, or you can use the

default triathlon activity set up for a standard triathlon.

Creating a Multisport Activity

From the watch face, select

Select a multisport activity type, or enter a custom name.

Duplicate activity names include a number, for example:

Triathlon(2).

Select two or more activity profiles.

Select an option:

• Select an option to customize specific activity settings. For

example, you can select whether to include transitions.

• Select Done to save and use the multisport activity.

Select Yes to add the activity to your list of favorites.

Tips for Triathlon Training or Using Multisport

Activities

• Select

to start your first activity.

• Select LAP to transition to the next activity.

If transitions are turned on, the transition time is recorded

separately from the activity times.

• If necessary, select LAP to start the next activity.

• Select UP or DOWN to view additional data pages.

Activities

2).

WARNING

> Add > Multisport.

Swimming

The device is intended for surface swimming. Scuba diving with

the device may damage the product and will void the warranty.

NOTE: The device cannot record heart rate data while

swimming.

NOTE: The device is compatible with the HRM-Tri

and the HRM-Swim

accessory

™

page

5).

Swim Terminology

Length: One trip down the pool.

Interval: One or more consecutive lengths. A new interval starts

after a rest.

Stroke: A stroke is counted every time your arm wearing the

device completes a full cycle.

Swolf: Your swolf score is the sum of the time for one pool

length and the number of strokes for that length. For

example, 30 seconds plus 15 strokes equals a swolf score of

45. For open water swimming, swolf is calculated over 25

meters. Swolf is a measurement of swimming efficiency and,

like golf, a lower score is better.

Stroke Types

Stroke type identification is available only for pool swimming.

Your stroke type is identified at the end of a length. Stroke types

appear when you are viewing interval history. You can also

select stroke type as a custom data field

Screens, page

19).

Free

Freestyle

Back

Backstroke

Breast Breaststroke

Fly

Butterfly

Mixed More than one stroke type in an interval

Drill

Used with drill logging

Tips for Swimming Activities

• Before starting a pool swimming activity, follow the on-screen

instructions to select your pool size or enter a custom size.

• Select LAP to record a rest during pool swimming.

The device automatically records swim intervals and lengths

for pool swimming.

• Select LAP to record an interval during open water

swimming.

Resting During Pool Swimming

The default rest screen displays two rest timers. It also displays

time and distance for the last completed interval.

NOTE: Swim data is not recorded during a rest.

During your swim activity, select LAP to start a rest.

The display reverses to white text on a black background,

and the rest screen appears.

During a rest, select UP or DOWN to view other data screens

(optional).

Select LAP, and continue swimming.

Repeat for additional rest intervals.

Training with the Drill Log

The drill log feature is available only for pool swimming. You can

use the drill log feature to manually record kick sets, one-arm

swimming, or any type of swimming that is not one of the four

major strokes.

During your pool swim activity, select UP or DOWN to view

the drill log screen.

Select LAP to start the drill timer.

NOTICE

™

accessory

(Heart Rate While Swimming,

(Customizing the Data

(Training with the Drill Log, page