Garmin FORERUNNER 245 Kullanıcı El Kitabı - Sayfa 24
İzle Garmin FORERUNNER 245 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin FORERUNNER 245 40 sayfaları.
Sayfayı Yazdır
You can also follow a saved course, trying to match or exceed
previously set performance goals. For example, if the original
course was completed in 30 minutes, you can race against a
Virtual Partner trying to complete the course in under 30
minutes.
Creating and Following a Course on Your Device
1
From the watch face, select START.
2
Select an activity.
3
Hold UP.
4
Select Navigation > Courses > Create New.
5
Enter a name for the course, and select
6
Select Add Location.
7
Select an option.
8
If necessary, repeat steps 4 and 5.
9
Select Done > Do Course.
Navigation information appears.
10
Select START to begin navigation.
Saving Your Location
You can save your current location to navigate back to it later.
1
Hold LIGHT.
2
Select .
NOTE: You may need to add this item to the controls menu
(Customizing the Controls Menu, page
3
Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1
From the watch face, select START.
2
Select an activity.
NOTE: This feature is not available for all activities.
3
Hold UP.
4
Select Navigation > Saved Locations.
5
Select a saved location.
6
Select an option to edit the location.
Deleting All Saved Locations
You can delete all of your saved locations at once.
1
From the watch face, select START.
2
Select an activity.
NOTE: This feature is not available for all activities.
3
Hold UP.
4
Select Navigation > Saved Locations > Delete All.
Navigating to Your Starting Point During an
Activity
You can navigate back to the starting point of your current
activity in a straight line or along the path you traveled. This
feature is available only for activities that use GPS.
1
During an activity, select STOP > Back to Start.
2
Select an option:
• To navigate back to the starting point of your activity along
the path you traveled, select TracBack.
• To navigate back to the starting point of your activity in a
straight line, select Straight Line.
20
.
Navigating to the Starting Point of Your Last
Saved Activity
You can navigate back to the starting point of your last saved
activity in a straight line or along the path you traveled. This
feature is available only for activities that use GPS.
1
2
3
4
5
6
22).
Navigating to a Saved Location
Before you can navigate to a saved location, your device must
locate satellites.
1
2
3
4
5
6
7
Map
symbols appear on the map. When you are navigating to a
destination, your route is marked with a line on the map.
• Map navigation
• Map settings
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.
1
2
3
4
5
Panning and Zooming the Map
1
2
Your current location
, the track to follow
destination
appear on the map.
Select START.
Hold UP.
Select Navigation > Activities.
Select your last saved activity.
Select Back to Start.
Select an option:
• To navigate back to the starting point of your activity along
the path you traveled, select TracBack
• To navigate back to the starting point of your activity in a
straight line, select Straight Line.
From the watch face, select START.
Select an activity.
NOTE: This feature is not available for all activities.
Hold UP.
Select Navigation > Saved Locations.
Select a location, and select Go To.
Move forward.
The compass arrow points toward the saved location.
TIP: For more accurate navigation, orient the top of the
screen toward the direction in which you are moving.
Press START to start the activity timer.
represents your location on the map. Location names and
(Panning and Zooming the Map, page
(Map Settings, page
From the watch face, hold UP.
Select Settings > Activities & Apps.
Select the activity to customize.
Select the activity settings.
Select Data Screens > Add New > Map.
While navigating, select UP or DOWN to view the map.
Hold UP.
, and your
®
.
20)
21)
Navigation