Garmin FORERUNNER 245 Kullanıcı El Kitabı - Sayfa 7
İzle Garmin FORERUNNER 245 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin FORERUNNER 245 40 sayfaları.
Sayfayı Yazdır
The device is ready after it establishes your heart rate,
acquires GPS signals (if required), and connects to your
wireless sensors (if required).
6
Press START to start the activity timer.
The device records activity data only while the activity timer is
running.
NOTE: On a Forerunner 245 Music device, you can hold
DOWN while in an activity to open the music controls
Playback Controls, page
Tips for Recording Activities
• Charge the device before starting an activity
Device, page
26).
• Select BACK to record laps.
• Select UP or DOWN to view additional data pages.
Stopping an Activity
1
Select STOP.
2
Select an option:
• To resume your activity, select Resume.
• To save the activity and return to watch mode, select
Save > Done.
• To suspend your activity and resume it at a later time,
select Resume Later.
• To mark a lap, select Lap.
• To navigate back to the starting point of your activity along
the path you traveled, select Back to Start > TracBack.
NOTE: This feature is available only for activities that use
GPS.
• To navigate back to the starting point of your activity by
the most direct path, select Back to Start > Straight Line.
NOTE: This feature is available only for activities that use
GPS.
• To discard the activity and return to watch mode, select
Discard > Yes.
NOTE: After stopping the activity, the device saves it
automatically after 30 minutes.
Adding an Activity
Your device comes preloaded with a number of common indoor
and outdoor activities. You can add these activities to your
activity list.
1
Select START.
2
Select Add.
3
Select an activity from the list.
4
Select Yes to add the activity to your list of favorites.
5
Select a location in the activity list.
6
Press START.
Creating a Custom Activity
1
From the watch face, select START > Add.
2
Select an option:
• Select Copy Activity to create your custom activity
starting from one of your saved activities.
• Select Other to create a new custom activity.
3
If necessary, select an activity type.
4
Select a name or enter a custom name.
Duplicate activity names include a number, for example:
Bike(2).
5
Select an option:
Activities and Apps
18).
(Charging the
• Select an option to customize specific activity settings. For
example, you can customize the data screens or auto
features.
• Select Done to save and use the custom activity.
6
Select Yes to add the activity to your list of favorites.
Indoor Activities
(Music
The Forerunner device can be used for training indoors, such as
running on an indoor track or using a stationary bike. GPS is
turned off for indoor activities.
When running or walking with GPS turned off, speed, distance,
and cadence are calculated using the accelerometer in the
device. The accelerometer is self-calibrating. The accuracy of
the speed, distance, and cadence data improves after a few
outdoor runs or walks using GPS.
TIP: Holding the handrails of the treadmill reduces accuracy.
You can use an optional foot pod to record pace, distance, and
cadence.
When cycling with GPS turned off, speed and distance are not
available unless you have an optional sensor that sends speed
and distance data to the device (such as a speed or cadence
sensor).
Recording a Strength Training Activity
You can record sets during a strength training activity. A set is
multiple repetitions (reps) of a single move.
1
From the watch face, select START > Strength.
The first time you record a strength training activity, you must
select which wrist your watch is on.
2
Select START to start the set timer.
3
Start your first set.
The device counts your reps. Your rep count appears when
you complete at least four reps.
TIP: The device can only count reps of a single move for
each set. When you want to change moves, you should finish
the set and start a new one.
4
Select BACK to finish the set.
The watch displays the total reps for the set. After several
seconds, the rest timer appears.
5
If necessary, select DOWN and edit the number of reps.
TIP: You can also add the weight used for the set.
6
When you are done resting, select BACK to start your next
set.
7
Repeat for each strength training set until your activity is
complete.
8
After your last set, select START to stop the set timer.
9
Select Save.
Tips for Recording Strength Training Activities
• Do not look at the device while performing reps.
You should interact with the device at the beginning and end
of each set, and during rests.
• Focus on your form while performing reps.
• Perform bodyweight or free weight exercises.
• Perform reps with a consistent, wide range of motion.
Each rep is counted when the arm wearing the device returns
to the starting position.
NOTE: Leg exercises may not be counted.
• Turn on automatic set detection to start and stop your sets.
• Save and send your strength training activity to your Garmin
Connect account.
You can use the tools in your Garmin Connect account to
view and edit activity details.
3