Garmin FORETREX 601 BALLISTIC EDITION Kullanıcı El Kitabı - Sayfa 17
İzle Garmin FORETREX 601 BALLISTIC EDITION için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin FORETREX 601 BALLISTIC EDITION 30 sayfaları. Ballistic edition
Ayrıca Garmin FORETREX 601 BALLISTIC EDITION için: Kullanıcı El Kitabı (18 sayfalar)
Sayfayı Yazdır
Editing Gun Properties
1 From the Applied Ballistics page, select ENTER > PROFILE > GUN PROPERTIES.
2 Select
or
to scroll through each field, and select ENTER to edit the values.
3 Select an option:
• To calibrate the muzzle velocity, select CALIBRATE MUZZLE VELOCITY, enter the range and true drop,
and select USE.
NOTE: Garmin
recommends you calibrate the muzzle velocity prior to the drop scale factor. Calibrating
®
the muzzle velocity provides a more accurate solution in the supersonic range for your specific firearm.
• To calibrate the drop scale factor, select CALIBRATE DSF, enter the range and true drop, and select USE.
NOTE: Calibrating the drop scale factor provides a more accurate solution at or beyond the transonic
range for your specific firearm.
4 Select VIEW DSF TABLE to review the drop scale factor table based on Mach speeds and calibrated drop
scale factor values.
5 Select MV-TEMP TABLE to review muzzle velocity adjustments based on the ambient temperature.
Clearing the Drop Scale Factor Table
The drop scale factor table is populated after you calibrate the drop scale factor. If necessary, you can reset the
table values to zero.
From the Applied Ballistics page, select ENTER > PROFILE > GUN PROPERTIES > VIEW DSF TABLE > ENTER
> CLEAR DSF TABLE.
Editing the Muzzle Velocity and Temperature Table
1 From the Applied Ballistics page, select ENTER > PROFILE > GUN PROPERTIES > MV-TEMP TABLE > ENTER
> EDIT.
2 Select
or
to scroll through each field.
3 Select ENTER to edit the values.
Clearing the Muzzle Velocity and Temperature Table
The muzzle velocity and temperature table is populated after you calibrate the muzzle velocity. If necessary, you
can reset the table values to zero.
From the Applied Ballistics page, select ENTER > PROFILE > GUN PROPERTIES > MV-TEMP TABLE > ENTER
> CLEAR MV-TEMP.
Deleting a Profile
1 From the Applied Ballistics page, select ENTER > PROFILE.
2 Select your current profile.
A list of profiles appears.
3 Select a profile.
4 Select DELETE PROFILE.
Customizing Your Device
13