Garmin quatix Kullanıcı El Kitabı - Sayfa 11

İzle Garmin quatix için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin quatix 22 sayfaları. Gps watch
Ayrıca Garmin quatix için: Uygunluk Beyanı (6 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Ürün Bilgileri (44 sayfalar)

Sayfayı Yazdır

The device displays in degrees the amount that your actual

course varies from your expected course

over ground

. The bezel marks

that represents your lift angle.

When your boat is consistently headed, you should change tack

and recalibrate the true wind direction or the angle for the

current tack. Recalibration ensures the tack assist provides

accurate information.

Configuring Tack Assist Settings

Select the blue key.

Select Tack Assist.

Select an option:

• To enable tack assist, select Turn On.

• To disable tack assist, select Turn Off.

• To turn bezel tick marks on or off, select Tick Marks.

Calibrating the Tack Assist

Before you can use tack assist, you must calibrate the optimal

tack angle for your boat.

Select the blue key.

Select Tack Assist > Full Cal..

Follow the on-screen instructions.

Calibrating the Tack Assist Manually

During a race, you may need to adjust tack assist settings

individually to adapt to changing conditions.

NOTE: See

page 6

for more information about the relationship

between the data stored by the tack assist feature.

Select the blue key.

Select Tack Assist.

Select an option:

• To recalibrate the port or starboard tack direction, hold a

steady course along the intended port or starboard tack,

and select Recal..

Applications

and your speed

provide a quick reference

NOTE: When you recalibrate the port or starboard tack

direction, the tack angle remains the same, and the mean

true wind direction and the opposite tack direction are

recalculated.

• To change the tack angle, select Tack Angle, and select

an angle.

NOTE: When you change the tack angle, the mean true

wind direction remains the same, and the port and

starboard tacks each change by half of the amount of

change in the tack angle with respect to the true wind

direction. For example, if the tack angle changes by 10º,

the port tack changes by -5º and the starboard tack

changes by 5º. If the tack angle changes by -10º, the port

tack changes by 5º and the starboard tack changes by

-5º.

• To change the mean true wind direction, select True

Wind D, and select the direction.

NOTE: When you change the mean true wind direction,

the tack angle remains the same, and the port and

starboard tack changes are equal to the amount of

change in the mean true wind direction. For example, if

the mean true wind direction changes by 10º, the port and

starboard tacks each change by 10º.

Viewing Tide Information

You can view information about a tide station, including the tide

height and when the next high and low tides will occur.

Select the blue key.

Select Tides > Search Near.

Select an option:

• To search near a previously saved waypoint, select

Waypoints, and select or search for a waypoint.

• To search near a specific city, select Cities, and select or

search for a city.

A list of the tide stations near the selected location appears.

Select a station.

A 24-hour tide chart appears for the current date, showing

the current tide height

tides

will occur.

Select an option:

• To view more detailed information about the next four tide

peaks and troughs, select

• To pan the tide chart, select the blue key, and select Pan

Chart.

• To view tide information for a different date, select the

blue key, select Change Date, and select the date.

Pairing With an Autopilot

You can refer to the GHC™ owner's manual for more

information about using the GHC.

Select the blue key.

Select Autopilot > Yes.

Set the GHC to search for a remote.

and when the next high

and low