A-Collection aFlood tec Montaj Talimatları

Taşkın Işık A-Collection aFlood tec için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. A-Collection aFlood tec 4 sayfaları.
Ayrıca A-Collection aFlood tec için: Montaj Talimatları (4 sayfalar)

Sayfayı Yazdır
A-Collection aFlood tec Montaj Talimatları
Mounting Instructions
Floodlight aFlood tec
Dimensions
Unit: mm
Output
H1
12W
175
24W
220
48W
290
72W
330
120W
400
200W
400
Maximum projected area of the floodlight:
12W: 0.024m
24W: 0.037m
48W: 0.065m
72W: 0.083m
120W: 0.136m
200W: 0.136m
Mounting
Step 1: Open the packaging and examine the fixture. If the fixture
is damaged, please contact the distributor.
Step 2: Mount the fixture's bracket to a wall or clamp.
Step 3: Adjust the fixture's position and angle the light in the
desired direction before tightening the screws on the side
of the fixture.
Step 4: Make sure the cables are connected correctly.
Brown - Line Blue - Neutral Yellow/Green - Earth
Safety Message:
• Electrical installations should only be carried out by a licensed electrician.
• Switch off the power to the fi xture and wait until it has cooled down before disassembling.
• In the event of faults, the power to the fi xture must be switched off immediately.
Do not attempt to repair the fi xture yourself.
Contact your Ahlsell retailer to replace the fi xture.
• The mininum distance from lighted objects
to luminaries shall be kept at least 0.3m
Ahls_Produktblad_Strå l kastare aFlood tec_20161128_EN_SE_NO_FI.indd 1
Ahls_Produktblad_Strå l kastare aFlood tec_20161128_EN_SE_NO_FI.indd 1
H2
L1
L2
205
135
150
251
170
200
330
225
243
372
250
265
450
340
360
450
340
360
2
2
2
2
2
2
T
D1
D2
W1
42
31
8
20
45
35
9
30
55
40
9
35
75
40
9
40
90
55
20
55
90
55
20
55
Dimension of Tempered Glass:
12W: 165x128x4 (mm)
24W: 213x163x4 (mm)
48W: 283x218x4 (mm)
72W: 320x242x4 (mm)
120W: 390x332x5 (mm)
200W: 390x332x5 (mm)
ENGLISH
W2
R
Ø
8.5
4.25
8.5
10.5
5.25
10.5
11
5.5
12.5
11
5.5
12.5
13
6.5
13
13
6.5
13
2016-11-28 15:20
2016-11-28 15:20