Garmin GNS 530 Hızlı Referans - Sayfa 4

Araç Navigasyon sistemi Garmin GNS 530 için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Garmin GNS 530 23 sayfaları. Supplement a21 to the airplane flight manual da 40 diamond com/nav/gps
Ayrıca Garmin GNS 530 için: Pilot El Kitabı (22 sayfalar), Talimatlar Kılavuzu (6 sayfalar), Pilot El Kitabı Eki (27 sayfalar), Pilot El Kitabı Eki (4 sayfalar), Hızlı Referans (16 sayfalar), Broşür (1 sayfalar), Pilot El Kitabı Eki (22 sayfalar), Kurulum Kılavuzu (14 sayfalar), Manuel (35 sayfalar)

POWER ON

The Instrument Panel Self-test Page allows the

pilot to verify that the GNS 530 is communicating

properly with in-panel instruments. Compare

on-screen indications with the information

depicted on connected instruments, such as the

CDI, HSI, RMI, and/or external annunciators.

After verifying proper operation, press the ENT

Key to display the Satellite Status Page.

diSpLAy LAyoUt (wiNdowS)

The GNS 530' s display is divided into four separate

windows (or display areas). The left side of the display

provides a COM Window (top two lines) and a VLOC

window (by default with VOR ident/radial, but selectable

for other data). The right side of the display consists

of a GPS Window, which shows the various navigation,

waypoint information and settings pages. The bottom of

the display is used for annunciators.

Active Frequency

Standby Frequency

VLOC Window

VLOC Ident Window

(user-selectable; can

also display traffic or

other data)

Each unique screen of information is referred to as

a page. Pages are typically selected using the small and

large right knobs, with the cursor removed from the GPS

Window. See pages 6 and 7 for details on arrangement of

the GNS 530' s main pages.

CURSoRS

There are two separate cursors: a tuning cursor and a

GPS window cursor. The tuning cursor is used to select

the standby COM or VLOC frequency. Press the small left

knob to move the tuning cursor to VLOC Window. Then,

use the small and large left knobs to select the desired

frequency. The COM Flip-flop and VLOC Flip-flop

keys are used to activate the selected frequency. Use the

large right knob to move the GPS window cursor around

the page.

GNS 530(A) Quick Reference

GPS Window

COM Window

190-00181-01 Rev. G