Brother 2340CV Servis Kılavuzu - Sayfa 6
Dikiş Makinesi Brother 2340CV için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Brother 2340CV 16 sayfaları. User manual - french and nederlands
Ayrıca Brother 2340CV için: Kullanım Kılavuzu (40 sayfalar), (Fransızca) Manuel D'instructions (41 sayfalar)
![Brother 2340CV Servis Kılavuzu](/uploads/products/server2/2301331/2301331.jpg)
- 1. Table of Contents
- 2. How to Use this Manual
- 3. How to Adjust
- 3. Height of Needle Bar
- 3. Position of the Lowerlooper
- 3. Timing of the Double Chain Looper
- 3. Timing of the Lowerlooper
- 3. Height of Feed Dog (with a Differential Feed Dog)
- 3. Feed Timing
- 3. Height of Presser Bar
- 3. Thread Tension Adjustment
- 3. Position of Thread Take-Up
- 3. Position of Looper Thread Take-Up
- 3. Adjustment and Replacement for the Timing Belt
- 3. Changing the Light Bulb
HOW TO ADJUST......
Right needle
3 mm ± 0.2
Adjust the needle and double chain looper
1. When the needle is raised to 2.8 - 3.2 mm above its lowest position, place the pointed end of the double chain
looper against the right side of the needle. The point of the double chain looper should be between 0 - 0.05 mm
from the needle.
2. Firmly tighten bolt 5 × 16
Timing of the double chain looper
Left needle
(Three needle models)
0 - 0.05 mm
Double chain
looper
Movable
needle guard
Movable
needle guard
0 - 0.05 mm
0 - 0.05 mm
Bolt 5 × 16
5