Brother 885-X03 Kullanım Kılavuzu - Sayfa 42

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Use the cleaning brush or a vacuum

6

cleaner to remove any dust from the race

and its surrounding area.

1

1 Cleaning brush

2 Race

• Do not apply oil to the bobbin case.

Insert the bobbin case so that the ▲ mark

7

on the bobbin case aligns with the ● mark

on machine as shown below.

• Align the ▲ and ● marks.

1 ▲ mark

2 ● mark

3 Bobbin case

• Make sure that the indicated points are

aligned before installing the bobbin case.

www.SewingSupplyWarehouse.com

41

2

1

1

2

3

Install the needle plate, and then tighten

8

the screws.

1 Screws

• Make sure that you install the needle plate

securely.

CAUTION

●

Never use a bobbin case that is

scratched; otherwise the upper thread

may become tangled, the needle may

break, or sewing performance may

suffer. For a new bobbin case (part code:

2

XE9326-001), contact your nearest

authorized service center.

●

Make sure that you fit the bobbin case

properly, otherwise the needle may

break.

1