Brother 885-X13 Kullanım Kılavuzu - Sayfa 45

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Symptom

▲

The fabric is

wrinkled.

Stitches are

skipped.

The needle

threader can

not be used.

The stitch is

not sewn

correctly.

The fabric

does not feed.

Possible cause

The thread tension is incorrect.

You have not threaded the upper thread

properly.

You have not used the right combination of

fabric, thread and needle.

The needle is bent or blunt.

The needle is incorrectly installed.

Dust has accumulated under the needle

plate or in the bobbin case.

The needle has not been raised to the

correct position.

You have not inserted the needle properly.

The presser foot that you are using is not

correct for the type of stitch.

The thread tension is incorrect.

The thread is tangled.

The stitch is too fine.

The darning plate is fitted on the needle

plate.

You have not used the right combination of

fabric, thread and needle.

The thread is tangled, for example, in the

race.

The presser foot you are using is not

appropriate for the type of stitch that you

want to sew.

How to put it right

Adjust the tension of the upper thread.

Correct the upper threading.

Choose a thread and needle that are

appropriate for the type of fabric.

Replace the needle.

Correctly install the needle.

Remove the needle plate and clean the

plate and the bobbin case.

Raise the needle by turning the

handwheel toward you

(counterclockwise) so that the mark on

the wheel points up.

Insert the needle properly.

Attach the presser foot that is correct

for the type of stitch that you want to

sew.

Adjust the tension of the upper thread.

Remove the tangled thread. If the

thread is tangled in the bobbin case,

clean the bobbin case.

Lengthen the stitch length.

Remove the darning plate.

Choose a thread and needle that are

appropriate for the type of fabric.

Remove the tangle thread. If the thread

is tangled in the race, clean the race.

Attach the presser foot that is correct

for the type of stitch that you want to

sew.

Page

26

16

21

7

7

40

18

7

–

26

40

–

–

21

40

6

36

44