Garmin VIEO RV 1050 Series Kullanıcı El Kitabı - Sayfa 25
Araç Navigasyon sistemi Garmin VIEO RV 1050 Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin VIEO RV 1050 Series 38 sayfaları.
Sayfayı Yazdır
Advisory
Description
Channel Not
The channel you requested is not a valid SiriusXM
Available
channel, or the channel that you were listening to is
no longer available. You may see this message
briefly the first time you connect a new SiriusXM
Connect Vehicle Tuner.
Channel Not
The channel you requested is not included in your
Subscribed
SiriusXM subscription package, or the channel you
were listening to is no longer included in your
SiriusXM subscription package.
Channel Locked The channel you requested is locked by the parental
control feature.
Clearing SiriusXM Data
You can clear all entered SiriusXM user information, such as
favorite teams and alerts.
Use the FACTORY RESET option in the settings menu to
reset the stereo.
NOTE: The factory reset setting resets all data in the stereo,
including AM and FM presets, zone settings, etc. in addition
to clearing all SiriusXM user information.
DAB Playback
When you connect a compatible Digital Audio Broadcasting
(DAB) module and antenna, such as the MS-DAB100A to the
Vieo stereo, you can tune in to and play DAB stations.
DAB broadcasts are not available in all regions. When the
stereo is not set to a compatible region, the DAB source is not
available.
Setting the Tuner Region
You must select the region you are in to receive DAB stations
properly.
1
Select
>
>
>
2
Select the region you are in.
Scanning for DAB Stations
Before you can scan for DAB stations, you must connect a
compatible DAB module and antenna (not included) to the
stereo. Because DAB signals are broadcast in select countries
only, you must also set the tuner region to a location where DAB
signals are broadcast.
1
Select the DAB source.
2
Select
to scan for available DAB stations.
When scanning is complete, the first available station in the
first ensemble found begins playing.
NOTE: After the first scan is complete, you can select
again to re-scan for DAB stations. When the re-scan is
complete, the system starts playing the first station in the
ensemble you were listening to when you started the re-scan.
Changing DAB Stations
1
Select the DAB source.
2
If necessary, select
to scan for local DAB stations.
3
Select
or
to change the station.
When you reach the end of the current ensemble, the stereo
automatically changes to the first available station in the next
ensemble.
Selecting a DAB Station from a List
1
Select the DAB source.
2
If necessary, select
to scan for local DAB stations.
3
Select
> BROWSE > STATIONS.
4
Select a station from the list.
Selecting a DAB Station from a Category
1
Select the DAB source.
Music Playback
> TUNER REGION.
Resolutions
Go to
www.siriusxm.com
for more information about the SiriusXM channel
lineup.
Go to
www.siriusxm.com
or call 866-635-2349 for more information about
your subscription package or to subscribe to the channel.
Refer to the parental control section in the owner's manual to unlock
channels.
2
If necessary, select
3
Select
> BROWSE > CATEGORIES.
4
Select a category from the list.
5
Select a station from the list.
Presets
You can save your favorite AM stations and FM stations as
presets for easy access.
You can save your favorite SiriusXM channels if you are
connected to an optional SiriusXM tuner and antenna.
You can save your favorite DAB stations if you are connected to
an optional DAB antenna.
Saving a Station as a Preset
1
With an applicable source selected, tune the stereo to a
station or a channel.
2
Select the PRESETS tab.
3
Select
.
TIP: You can quickly save the selected AM/FM station or DAB
channel as a preset by holding
Selecting a Preset from a List
1
With an applicable source selected, select the PRESETS tab.
2
Select a preset from the list.
Removing Presets
1
With an applicable source selected, select the PRESETS tab.
2
Select .
3
Select each preset you want to remove.
4
When you are finished removing presets, select .
Fusion PartyBus
™
The Fusion PartyBus networking feature allows you to connect
multiple compatible stereos and zone stereos together on a
network, using a combination of wired or wireless connections.
A Fusion PartyBus stereo, such as an Vieo RV 850 stereo, can
stream sources to other Fusion PartyBus devices connected to
the network. Connected Fusion PartyBus devices can also
control media playback on the Fusion PartyBus stereo. A Fusion
PartyBus zone stereo, such as an Apollo
can stream from a Fusion PartyBus stereo, but cannot stream
sources to other Fusion PartyBus devices on the network.
You can connect up to eight Fusion PartyBus devices on a
network wirelessly.
to scan for local DAB stations.
.
Networking
™
SRX400 zone stereo
19