Garmin GDL 69 Etkinleştirme Talimatları - Sayfa 20

Aviyonik Ekran Garmin GDL 69 için çevrimiçi göz atın veya pdf Etkinleştirme Talimatları indirin. Garmin GDL 69 38 sayfaları. Xm satellite radio instructions for continued airworthiness
Ayrıca Garmin GDL 69 için: Etkinleştirme Talimatları (46 sayfalar), Pilot El Kitabı Eki (50 sayfalar), Pilot El Kitabı Eki (50 sayfalar), Etkinleştirme Talimatları (16 sayfalar), Talimatlar Kılavuzu (44 sayfalar), Talimatlar Kılavuzu (8 sayfalar), Manuel (15 sayfalar)

5. Refer to Table 4-1 to read the SAT ID/CONNECTIVITY information.

6. Verify radio IDs and signal quality is between 2 – 3. If signal quality is zero, check the antenna and

wiring.

'- -'

'XM'

'X0', 'X1', 'X2', or 'X3'

'-0', '-1', '-2', or '-3'

"Searching..."

"Satellite in view"

4.3 Verify XM Subscribed Services

The 430/530 supports the following weather services: NEXRAD, graphical METAR, text-based METAR,

Wind, and Graphical Temperature/Dew Point. These services are available only in the United States.

Verify included services by displaying them on the unit, if applicable. If signal quality is between 1 and

3, but no data is displayed, contact XM Satellite Radio to verify subscription. Be sure that the unit is

updated with the most current software.

Page 14

190-00355-04

GDL 69/69A – 430/530 Series interface communications not yet established.

GDL 69/69A not yet communicating with internal satellite radio hardware (normal

during power-up).

'X' = Satellite radio service activated. Satellite signal quality is indicated by the

numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.

'-' = Satellite radio service is not activated. Satellite signal quality is indicated by

the numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.

Connectivity Field

No satellite is currently in view, signal quality is '0'.

Indicates a signal quality between 1 and 3.

SAT ID Field

XM Activation Procedures

Rev. H