Garmin ECHOMAP PLUS 70 series Kullanıcı El Kitabı - Sayfa 47

Deniz GPS Sistemi Garmin ECHOMAP PLUS 70 series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin ECHOMAP PLUS 70 series 50 sayfaları.
Ayrıca Garmin ECHOMAP PLUS 70 series için: Hızlı Başlangıç Kılavuzu (8 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Garmin ECHOMAP PLUS 70 series Kullanıcı El Kitabı

Sentence Description

PGRMZ

Z: Altitude

SDDBT

DBT: Depth below transducer

SDDPT

DPT: Depth

SDMTW

MTW: Water temperature

SDVHW

VHW: Water speed and heading

Receive

Sentence

Description

DPT

Depth

DBT

Depth below transducer

MTW

Water temperature

VHW

Water speed and heading

WPL

Waypoint location

DSC

Digital selective calling information

DSE

Expanded digital selective calling

HDG

Heading, deviation, and variation

HDM

Heading, magnetic

MWD

Wind direction and speed

MDA

Meteorological composite

MWV

Wind speed and angle

VDM

AIS VHF data-link message

You can purchase complete information about National Marine

Electronics Association (NMEA) format and sentences from:

NMEA, Seven Riggs Avenue, Severna Park, MD 21146 USA

(www.nmea.org)

Registering Your Device

NOTE: If your device has Wi‑Fi technology, you should use the

ActiveCaptain app to register the device

the ActiveCaptain App, page

Help us better support you by completing our online registration

today. Keep the original sales receipt, or a photocopy, in a safe

place.

Insert a memory card into the card slot on the chartplotter.

Wait a few moments.

The chartplotter opens the card management page and

creates a file named GarminDevice.xml in the Garmin folder

on the memory card.

Remove the memory card.

Insert the memory card into your computer.

On your computer, go to garmin.com/express.

Follow the on-screen instructions to download, install, and

open the Garmin Express application.

Select

> Add a Device.

While the application searches, select Sign In next to Have

marine charts or devices? near the bottom of the screen.

Create or sign in to your Garmin account.

Follow the on-screen instructions to set up your vessel.

Select

> Add.

The Garmin Express application searches the memory card

for the device information.

Select Add Device to register the device.

When registration is complete, the Garmin Express

application searches for additional charts and chart updates

for your device.

When you add devices to the chartplotter network, repeat these

steps to register the new devices.

Appendix

(Getting Started with

4).

Software Update

NOTE: If your device has Wi‑Fi technology, you should use the

ActiveCaptain app to update the device software

Software with the ActiveCaptain App, page

You may need to update the device software when you install

the device or add an accessory to the device.

This device supports up to a 32 GB memory card, formatted to

FAT32.

Before you update the software, you can check to the software

version installed on your device

Information, page

35). Then, you can go to

/software/marine.html, select See All Devices in this Bundle, and

compare the installed software version to the software version

listed for your product.

If the software on your device is older than the one listed on the

website, follow the steps to load the software on a memory card

(Loading the New Software on a Memory Card, page

then update the device software

page

41).

Loading the New Software on a Memory Card

You must copy the software update to a memory card using a

computer that is running Windows software.

NOTE: You can contact Garmin customer support to order a

preloaded software update card if you do not have a computer

with Windows software.

Insert a memory card into the card slot on the computer.

Go to garmin.com/support/software/marine.html.

Select echoMAP Series with SD Card.

Select Download next to echoMAP Series with SD Card.

Read and agree to the terms.

Select Download.

Choose a location, and select Save.

Double-click the downloaded file.

A Garmin folder containing the software update is created in

the selected location. A dialog box opens to assist in

transferring the software update to a memory card.

Select Next.

Select the drive associated with the memory card, and select

Next > Finish.

A Garmin folder containing the software update is created on the

memory card. The software update can take several minutes to

load onto the memory card.

Updating the Device Software

Before you can update the software, you must obtain a

software-update memory card or load the latest software onto a

memory card

(Loading the New Software on a Memory Card,

page

41).

Turn on the chartplotter.

After the home screen appears, insert the memory card into

the card slot.

NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is

inserted.

Follow the on-screen instructions.

Wait several minutes while the software update process

completes.

When prompted, leave the memory card in place and restart

the chartplotter manually.

Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

(Updating

4).

(Viewing System Software

garmin.com/support

41), and

(Updating the Device Software,