Garmin FLEET 790 Kullanıcı El Kitabı - Sayfa 14

Deniz GPS Sistemi Garmin FLEET 790 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin FLEET 790 27 sayfaları.

Sayfayı Yazdır
3
Select
> Save.
4
Enter a name, and select Done.
Saving Your Current Location
1
From the map, select the vehicle icon.
2
Select Save.
3
Enter a name, and select Done.
4
Select OK.
Editing a Saved Location
1
Select Where To? > Saved.
2
If necessary, select a category.
3
Select a location.
4
Select
.
5
Select
> Edit.
6
Select an option:
• Select Name.
• Select Phone Number.
• Select Categories to assign categories to the saved
location.
• Select Change Map Symbol to change the symbol used
to mark the saved location on a map.
7
Edit the information.
8
Select Done.
Assigning Categories to a Saved Location
You can add custom categories to organize your saved
locations.
NOTE: Categories appear in the saved locations menu after you
have saved at least 12 locations.
1
Select Where To? > Saved.
2
Select a location.
3
Select
.
4
Select
> Edit > Categories.
5
Enter one or more category names, separated by commas.
6
If necessary, select a suggested category.
7
Select Done.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1
Select Where To? > Saved.
2
Select
> Delete Saved Places.
3
Select the box next to the saved locations to delete, and
select Delete.

Using the Map

You can use the map to navigate a route
Map, page
5) or to view a map of your surroundings when no
route is active.
1
Select View Map.
2
Touch anywhere on the map.
3
Select an option:
• Drag the map to pan left, right, up, or down.
• To zoom in or out, select
• To switch between North Up and 3-D views, select .
• To filter the displayed points of interest by category, select
.
• To start a route, select a location on the map, and select
Go!
(Starting a Route by Using the Map, page
10
(Your Route on the
or
.
5).

Map Tools

Map tools provide quick access to information and device
functions while you view the map. When you activate a map
tool, it appears in a panel at the edge of the map.
Stop: Stops navigation of the active route.
Change Route: Allows you to take a detour or skip locations in
your route.
Up Ahead: Displays upcoming locations along the route or the
road on which you are traveling
Turns: Displays a list of upcoming turns in your route
Turns and Directions, page
Trip Data: Displays customizable trip data, such as speed or
mileage
(Viewing Trip Data from the Map, page
Volume: Adjusts the master audio volume.
Traffic: Displays traffic conditions along your route or in your
area
(Viewing Upcoming Traffic, page
Elevation: Displays elevation changes ahead.
Viewing a Map Tool
1
From the map, select
2
Select a map tool.
The map tool appears in a panel at the edge of the map.
3
When you are done using the map tool, select
Enabling Map Tools
By default, only the most commonly used map tools are enabled
in the map tools menu. You can add up to 12 tools to the menu.
1
From the map, select
2
Select the check box next to each tool to add.
3
Select Save.
Up Ahead
The Up Ahead tool provides information about upcoming
locations along your route or the road on which you are
traveling. You can view upcoming points of interest, such as
restaurants, fuel stations, or rest areas. When traveling on a
highway, you can also view information and available services
for upcoming exits and cities, similar to the information on
highway road signs.
You can customize three categories to show in the Up Ahead
tool.
Viewing Upcoming Locations
1
From the map, select
2
Select an option:
• To view the next upcoming location in each category,
select , if necessary.
• To view information and available services for upcoming
highway exits or cities, select .
NOTE: This option is available only while you are traveling
on a highway or when your route includes a highway.
3
Select an item to view a list of locations for that category,
exit, or city.
Customizing the Up Ahead Categories
You can change the location categories that appear in the Up
Ahead tool.
1
From the map, select
2
Select a category.
3
Select
.
4
Select an option:
• To move a category up or down in the list, select and drag
the arrow next to the category name.
• To change a category, select the category.
(Up Ahead, page
10).
5).
11).
11).
.
.
>
.
> Up Ahead.
> Up Ahead.
Using the Map
(Viewing