Map Page
(Optional) Data Fields can appear on the
right-hand side of the page
Map Display
Map Scale
The following symbols are used to depict the vari-
ous airports and navaids on the Map Page:
Airport with hard surface runway(s); Primary runway shown
Airport with soft surface runway(s) only
Private Airfield
VOR
VOR/DME
DME
Localizer
Heliport
To Select a Map Scale
1. Press the up arrow on the RNG key to zoom out to
a larger map area.
2. Press the down arrow on the RNG key to zoom in
to a smaller map area with more detail.
To Quickly Declutter the Map Display
The 500W series supports four levels of map decluttering.
1.
Press the CLR key momentarily to change the
amount of map detail. The declutter level will
appear adjacent to the map scale.
Press the CLR key as needed to select the desired
2.
amount of map detail.
MAP PAGE
Present Position
Intersection
VORTAC
TACAN
NDB
Locator Outer Marker
To Turn the Data Fields On Along the Right-hand
Side of the Map Page
1.
With the Map Page displayed, press MENU to
display an options menu.
Turn the large right knob to highlight "Data Fields
2.
On?", then press ENT.
3.
To return to a full-screen map display, follow steps
1 and 2, but instead select "Data Fields Off?" from
the options menu.
To Select a Different Data Item for any Data Field
With the Map Page displayed, press the MENU key
1.
to display an options menu.
2.
Turn the large right knob to highlight the "Change
Fields?" option and then press ENT.
3.
Turn the large right knob to highlight the data
field you wish to change.
Turn the small right knob to display a list of avail-
4.
able data items. Continue turning the small right
knob to select the desired data item from the list.
5.
Press ENT to select the desired data item and return
to the Map Page.
Press the small right knob to remove the cursor
6.
from the page.
9
Sayfayı Yazdır