Garmin GPSMAP 400 series Şablon Kılavuzu

Deniz GPS Sistemi Garmin GPSMAP 400 series için çevrimiçi göz atın veya pdf Şablon Kılavuzu indirin. Garmin GPSMAP 400 series 2 sayfaları. Non-waas; display interfaces
Ayrıca Garmin GPSMAP 400 series için: Talimatlar Kılavuzu (6 sayfalar), Pilot El Kitabı Eki (27 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Referans Kılavuzu (2 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar), Kurulum Talimatları Kılavuzu (30 sayfalar), Şablon (1 sayfalar), Yapılandırma Kılavuzu (2 sayfalar), Pilot El Kitabı (28 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar)

These instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on the

template and an incorrect cutout (too large or too small) on the mounting surface of your boat.

To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length and

width measurements are indicated on the template.

The paper size must be larger than the dimensions of the template. Select the paper size using the Properties button in the Adobe Acrobat print

dialog box.

Select Auto-Rotate and Center to ensure the template prints in the correct orientation.

ImPoRtAnt: When printing the flush mount template, set Page Scaling in the Adobe Acrobat print dialog box to none.

Page Scaling:

Select None:

Auto-Rotate and Center:

Select with a check mark

for correct orientation

After printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at the

correct size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for any

damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.

Printing a Mounting Template

Notice

Properties: Select

the paper size.

Paper size (example):

Use appropriate size paper.