Garmin GPSMAP 4208 - Marine GPS Receiver Teknik Referans - Sayfa 5

Deniz GPS Sistemi Garmin GPSMAP 4208 - Marine GPS Receiver için çevrimiçi göz atın veya pdf Teknik Referans indirin. Garmin GPSMAP 4208 - Marine GPS Receiver 30 sayfaları. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Ayrıca Garmin GPSMAP 4208 - Marine GPS Receiver için: Önemli Güvenlik Bilgileri (4 sayfalar), Önemli Bilgiler (2 sayfalar), Kullanıcı El Kitabı (2 sayfalar), Kurulum Talimatları Kılavuzu (19 sayfalar), Kurulum Talimatları Kılavuzu (25 sayfalar), Kurulum Talimatları Kılavuzu (25 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Uygunluk Beyanı (1 sayfalar), Ek Kılavuz (24 sayfalar)

Garmin GPSMAP 4208 - Marine GPS Receiver Teknik Referans

NMEA 2000 Fundamentals

NMEA 2000 Fundamentals
A NMEA 2000 network is made of connected NMEA 2000 devices that communicate using basic plug-and-play functionality.
If your boat already contains a NMEA 2000 network and you would like to add Garmin NMEA 2000 components, see
page
8.
For a glossary of commonly used NMEA 2000 terms, see
page
8.
After you have installed your NMEA 2000 network, use the checklist on
page 25
to verify the installation.

Garmin NMEA 2000 Device Overview

Garmin uses NMEA 2000 micro connectors on units, sensors, and T-connectors that are compatible with other NMEA 2000 micro connectors,
cables, and NMEA 2000-compatible devices. Garmin sensors may be packaged with a drop cable and a T-connector. Garmin displays may also
include additional NMEA 2000 components (such as a power cable). The NMEA 2000 components included with a Garmin sensor or display
are listed in the product documentation. A diagram on the product box shows which NMEA 2000 components are included.
-
+
Sample Box Diagram (GFS 10)
In the sample box diagram, a complete NMEA 2000 network is shown, and the parts included with the sensor are shaded. In this example, a
T-connector is included with a Garmin GFS 10 fuel sensor. A NMEA 2000 power cable, terminators, an additional drop/backbone cable, and
additional T-connectors are not included with a GFS 10 fuel sensor. The GFS 10 fuel sensor, as shown by the shaded components on the box
diagram, is intended to be connected to an existing NMEA 2000 network on your boat. If you do not have a NMEA 2000 network on your boat,
this guide will help you assemble one.
Technical Reference for Garmin NMEA 2000 Products