Garmin GPSMAP 4212 - Marine GPS Receiver Kurulum Talimatları Kılavuzu - Sayfa 20

Deniz GPS Sistemi Garmin GPSMAP 4212 - Marine GPS Receiver için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Garmin GPSMAP 4212 - Marine GPS Receiver 25 sayfaları. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Ayrıca Garmin GPSMAP 4212 - Marine GPS Receiver için: Önemli Güvenlik Bilgileri (4 sayfalar), Kullanıcı El Kitabı (2 sayfalar), Teknik Referans (30 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kurulum Talimatları Kılavuzu (19 sayfalar), Kurulum Talimatları Kılavuzu (25 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Uygunluk Beyanı (1 sayfalar), Şablon Kılavuzu (2 sayfalar), Ek Kılavuz (24 sayfalar)

Making the Final Connections to the GPSMAP 4000/5000 Series Chartplotter

After the power cable and the GPS antenna (as well as any optional Garmin Marine Network devices, NMEA 0183 devices, NMEA 2000

connections, or video connections) are wired to the boat, the cables must be connected to the GPSMAP 4000/5000 series chartplotter.

There are seven connectors on the back of the chartplotter, one for power, three for Garmin Marine Network devices, one for the NMEA 0183

cable, one for a NMEA 2000 cable, and one for the marine video cable.

To attach the power cable, the NMEA 0183 cable, and the marine video cable, carefully press the cable into the correct port on the back of the

chartplotter until it is firmly seated. Do not force the cable, because this may damage the pins. After the cable is seated, turn the locking ring

clockwise until it stops.

To attach a Garmin Marine Network cable or a NMEA 2000 Micro-connector cable, carefully press the cable into the correct port on the back of

the chartplotter until it is firmly seated. Do not force the cable, because this may damage the pins. After the cable is seated, turn the locking

ring clockwise until it is tight. Be careful not to overtighten the locking ring.

NMEA 2000 cable

Micro-connector

Garmin Marine Network

connectors

Your GPSMAP 4000/5000 series chartplotter may contain a software update SD card. If so, follow the instructions provided with the card.

If a software update SD card is not included, visit

version of software on your chartplotter, select or touch

GPSMAP 4000/5000 Series Connectors

updating the Chartplotter Software

www.garmin.com

Configure

to make sure your chartplotter software is up-to-date. To determine the

System

Information.

Power cable connector

Marine video cable

connector

NMEA 0183 cable

connector

GPSMAP 4000/5000 Series Installation Instructions