Garmin GPSMAP 5215 Kurulum Talimatları Kılavuzu - Sayfa 11

Deniz GPS Sistemi Garmin GPSMAP 5215 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Garmin GPSMAP 5215 25 sayfaları. Optical mouse
Ayrıca Garmin GPSMAP 5215 için: Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı El Kitabı (2 sayfalar), Kullanıcı El Kitabı (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kurulum Talimatları Kılavuzu (25 sayfalar), Teknik Referans (42 sayfalar), Sıva Altı Montaj Şablonu (2 sayfalar), Önemli Güvenlik Bilgileri (4 sayfalar), Ek Kılavuz (24 sayfalar)

Creating a basic NMeA 2000 Network

If your boat does not already have an existing NMEA 2000 network installed, you will need to create a basic NMEA 2000 network. For more

information on NMEA 2000, visit www.garmin.com.

To create a basic NMeA 2000 network

1. Connect the three included T-connectors together by their sides.

2. Connect the appropriate terminators to each end of the combined T-connectors.

3. Wire the included NMEA 2000 power cable to a 12 Vdc power source through a switch. Connect to the ignition switch for the boat if possible.

4. Connect the NMEA 2000 power cable to the top of one of the T-connectors.

5. Route and connect the included NMEA 2000 drop cables from the GPS 17x and from the GPSMAP 4000/5000 series chartplotter to the tops

of the other T-connectors.

NotE: The diagram shows only the NMEA 2000 data connection to the GPSMAP 4000/5000 series chartplotter. The chartplotter must also be

connected to power or it will not function. See

NotE: One GPS antenna will provide position data for every device on the NMEA 2000 network. Do not connect multiple GPS antennas if you are

using multiple chartplotters.

GPSMAP 4000/5000 Series Installation Instructions

GPSMAP 4000/5000

series chartplotter

Ignition or

in-line switch

Power cable

Fuse

1 Vdc battery

Female

terminator

Creating a Basic NMeA 2000 Network

page

GPS 17x

antenna

Drop cables

terminator

T-connectors

Male