alkitronic CLD/L Kullanım ve Bakım Kılavuzu - Sayfa 10

Araçlar alkitronic CLD/L için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. alkitronic CLD/L 12 sayfaları. Compact torque multiplier

Sayfayı Yazdır

Operating and maintenance manual

3.3

Maintenance

The alkitronic® CL multipliers are extremely power-

ful, robust products. To ensure durability and per-

formance over many years, regular maintenance is

required (performance check, engine check, safety

check).

Maintenance periods: Regularly 1x per year or after max.

1000 hours of operation if used properly.

alkitronic® multipliers should only be shipped to your al-

kitronic® Partner or to alki TECHNIK GmbH in the original

packaging to avoid damage.

In the event of prolonged periods without operation, the

motor of the alkitronic® CL multiplier must be supplied with

oil via the connector (1) of the compressed air supply at the

pistol grip (Fig. 8). This prevents corrosion damage to the

motor lamella (see Section 4.1, Air lubrication).

Protect the compressed air supply on the multiplier with a

protective cap to prevent dirt from entering.

4.1

Brand:

Type:

Properties:

Specification / Use:

(The manufacturer does not guarantee for other brands)

4.2

The sound pressure level measured at maximum engine

power exceeds 85 dB (A). The measurements were carried

out in accordance with the noise measurement method DIN

EN ISO 15744: 2008-11.

Vibration: There are no significant vibrations.

alkitronic® CL multipliers with lower sound pressure levels

(<85 dB (A)) are available as special versions. When fitting

Fig. 8

with silencer elements, the torque characteristics must be

corrected accordingly.

Declaration of conformity

alki Technik GmbH declares in sole responsibility: The

alkitronic® pneumatic multiplicator identified by types CLD/L,

CLS, CLS 2 /, CLD, CLV and serial numbers 913001 - 913699,

built in 2019, complies with all relevant regulations such as

directives / standards / safety regulations:

Technical Documents at alki TECHNIK GmbH,

Unterlettenweg 4, 85051 Ingolstadt / Germany.

Technical details

Air lubrication

Aral

Vitam DE 10

Resin and acid-free, moisture-

binding, high corrosion- and

wear protection

SAE 10W

Oil viscosity 40°C: -10 cST,

2-3 drops per min. during

continuous operation

Noise emission and vibrations

2006/42/EG,

DIN EN ISO 12100:2011-03,

DIN EN ISO 4414:2011-04,

DIN EN ISO 13849-2.2013-02,

DIN EN ISO 11148 6:2013-05,

DIN EN ISO 15744:2008-11

January 2019

Alexander Kipfelsberger,

Managing Director