Garmin GPSMAP 530 Temel İşlemler - Sayfa 3

Deniz GPS Sistemi Garmin GPSMAP 530 için çevrimiçi göz atın veya pdf Temel İşlemler indirin. Garmin GPSMAP 530 4 sayfaları. Flush mount template
Ayrıca Garmin GPSMAP 530 için: Kurulum Talimatları Kılavuzu (12 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Referans Kılavuzu (2 sayfalar), Talimatlar Kılavuzu (28 sayfalar), Uygunluk Beyanı (1 sayfalar), Şablon (1 sayfalar)

Sayfayı Yazdır

ABOUT GPS

The most frequently used features of any GPS are direct-to, map display, and

nearest airport. All the controls and indicators for the GPS are located on the

right side of the panel.

SELECT DIRECT-TO

Press the Direct-To key. The direct-to page appears, with the cursor on the

waypoint identiﬁer.

GPS Data Entry - Entering waypoints

and other data into the GPS is a three

step process.

1. Enter identifer letters and numbers

2. Conﬁrm it is the correct waypoint.

3. Activate the waypoint for navigation.

Enter Waypoint Identiﬁer - The large

right knob moves the cursor about the

page. The small right knob selects

individual characters.

If you don't see the cursor, press the

small right knob momentarily. The

cursor allows you to enter data and/or

make a selection from a list of options.

Conﬁrm Waypoint - Press ENT.

Activate Waypoint - Press ENT again.

The selected course is displayed as a

magenta line, and the CDI indicates the

direct course to the waypoint.

GPS MAPS

GNS 430

Display Default NAV Page - On the

GNS 430, press and hold the CLR key

for two seconds. The default NAV page

is displayed.

The default NAV page shows the

bearing and distance to the active

waypoint, ground speed, and estimated

time of arrival at the active waypoint.

Display Map Page - Turn the small

right knob one click clockwise. The

Map page is displayed. It is the

second in the NAV page group as

indicated below the map.

The Map page shows the active

waypoint identiﬁer, track and distance,

and ground speed.

GNS 530

Display Default NAV Page - On the GNS

530, press and hold the CLR key for two

seconds. The default NAV page is displayed.

This page shows a simpliﬁed map, track,

ground speed, and ETE to the active

waypoint.

Display Map Page - Turn the small right

knob one click clockwise. The Map page is

displayed. It is the second in the NAV page

group as indicated below the map.

ADJUST RANGE

Use the RNG key to change the map scale . The up arrow zooms out, the down

arrow zooms in. The current map scale is shown at the lower left corner of the

map.