Garmin GPSMAP 557 Kullanıcı El Kitabı - Sayfa 17

Deniz GPS Sistemi Garmin GPSMAP 557 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin GPSMAP 557 38 sayfaları.
Ayrıca Garmin GPSMAP 557 için: Hızlı Başlangıç Kılavuzu (4 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar)

Sayfayı Yazdır

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point.

Deleting All Saved Waypoints, Routes, and

Tracks

Select Nav Info > Manage Data > Clear User Data > All >

OK.

Combinations

The Combination screen shows a combination of different

screens at the same time. The number of options available on

the Combination screen depends on the optional devices you

have connected to your chartplotter and whether you are using

premium maps.

Selecting a Combination

Select Combinations.

Select a combination.

Customizing the Combinations Screen

Select Combinations.

Select a combination.

Select Menu.

Select an option:

• To change the name, select Name, and enter a new

name.

• To customize the data shown on the screen, select

Overlay Numbers

(page

Gauges and Almanac Information

Gauges provide various information about the trip, engine,

environment, and wind, and are available on all chartplotter

models. Numbers, Compass, and Trip gauges are available on

all chartplotters. Wind and Environment gauges require valid

wind data from the NMEA ® 0183 or NMEA 2000 network.

Engine gauges require a connection to the NMEA 2000

network, so they are not available on all chartplotter models.

The chartplotters also provide almanac information about tides,

currents, and the sun and moon, such as rise and set times.

Viewing the Compass

You can view information about your bearing, heading, and

route using the compass.

Select Gauges > Compass.

Viewing Trip Gauges

Trip gauges show information for odometer, speed, time, and

fuel for your present trip.

Select Gauges > Trip.

Resetting Trip Gauges

Select Gauges > Trip > Menu.

Select an option:

• To set all the readings for the present trip to zero, select

Reset Trip.

• To set the maximum speed reading to zero, select Reset

Maximum Speed.

• To set the odometer reading to zero, select Reset

Odometer.

• To set all the readings to zero, select Reset All.

Combinations

6).

Viewing Engine and Fuel Gauges

Before you can view engine and fuel gauges, you must be

connected to a NMEA 2000 network capable of sensing engine

and fuel data. See the installation instructions for details.

Select Gauges > Engine.

Customizing Engine Gauge and Fuel Gauge Limits

You can configure the upper and lower limits and the range of

desired standard operation of a gauge. When a value exceeds

the range of standard operation, the gauge becomes red.

NOTE: Not all options are available for all gauges.

Select Gauges > Engine > Menu > Gauge Setup > Set

Gauge Limits.

Select a gauge.

Select Gauge Limits > Custom > Edit Limits.

Select an option:

• To set the minimum value of the standard operating

range, select Rated Min..

• To set the maximum value of the standard operating

range, select Rated Max..

• To set the lower limit of the gauge lower than the rated

minimum, select Scale Min..

• To set the upper limit of the gauge higher than the rated

maximum, select Scale Max..

Select the limit value.

Repeat steps 4 and 5 to set additional gauge limits.

Enabling Status Alarms for Engine Gauges

You can enable the chartplotter to display engine status alarms.

Select Gauges > Engine > Menu > Gauge Setup > Status

Alarms > On.

When an engine alarms occurs, a gauge status alarm message

appears and the gauge may become red depending on the type

of alarm.

Enabling Some Engine Gauge Status Alarms

Select Gauges > Engine > Menu > Gauge Setup > Status

Alarms > Custom.

Select one or more engine gauge alarms to turn on or off.

Selecting the Number of Engines Shown in Gauges

You can show information for up to four engines.

Select Gauges > Engine > Menu > Gauge Setup > Engine

Selection > Number of Engines.

Select an option:

• Select the number of engines.

• Select Auto Configure to automatically detect the

number of engines.

Customizing the Engines Shown in Gauges

Before you can customize how the engines are shown in the

gauges, you must manually select the number of engines

(page

11).

Select Gauges > Engine > Menu > Gauge Setup > Engine

Selection > Edit Engines.

Select First Engine.

Select the engine to display in the first gauge.

Repeat steps 2 and 3 for the remaining engine bars.

Configuring the Fuel Gauges Display

Before you can configure and display the fuel levels, a

compatible fuel flow sensor or tank level sensors must be

connected to the NMEA 2000 network.