Garmin GPSMAP 8000 Series Kurulum Talimatları Kılavuzu - Sayfa 11
Deniz GPS Sistemi Garmin GPSMAP 8000 Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Garmin GPSMAP 8000 Series 14 sayfaları. Installation instructions
Ayrıca Garmin GPSMAP 8000 Series için: Kullanıcı El Kitabı (36 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Talimatlar Kılavuzu (15 sayfalar), Kullanıcı El Kitabı (43 sayfalar)
Sayfayı Yazdır
Item
Garmin Wire Function
Power
Power ground
Data ground
TxA (+)
TxB (-)
NMEA 0183-Compliant Device With a Single Transmitting Wire Connected to Send Data
Item
Description
12 Vdc power source
Power cable
NMEA 0183-compliant device
NMEA 0183 cable
Item
Garmin Wire Function
Power
Power ground
Data ground
RxB (-)
RxA (+)
Lamp or Horn Connections
The device can be used with a lamp, a horn, or both, to sound or
flash an alert when the chartplotter displays a message. This is
optional, and the alarm wire is not necessary for the device to
function normally. When connecting the device to a lamp or
horn, observe these considerations.
• The alarm circuit switches to a low-voltage state when the
alarm sounds.
GPSMAP 8000 Series Installation Instructions
Garmin Wire Color
Red
Black
Black
Gray
Pink
Garmin Wire Color
Red
Black
Black
Orange/white
White
• The maximum current is 100 mA, and a relay is needed to
limit the current from the chartplotter to 100 mA.
• To toggle visual and audible alerts manually, you can install
single-pole, single-throw switches.
NMEA 0183 Device Wire Function
Power
Power ground
Data ground
RxA
N/A
NMEA 0183 Device Wire Function
Power
Power ground
Data ground
N/A
TxA (+)
11