AEG 911535221 Kullanıcı Kılavuzu - Sayfa 20

Bulaşık Makinesi AEG 911535221 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG 911535221 24 sayfaları.

Sayfayı Yazdır

www.aeg.com

Problem and alarm code

The appliance door is diffi-

cult to close.

Rattling or knocking sounds

from the inside of the appli-

ance.

The appliance trips the cir-

cuit-beaker.

Once you have checked the appliance,

deactivate and activate the appliance. If

11.1 The washing and drying results are not satisfactory

Problem

Poor washing results.

Poor drying results.

There are whitish streaks or

bluish layers on glasses and

dishes.

There are stains and dry water

drops on glasses and dishes.

Possible cause and solution

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• Parts of the tableware are protruding from the baskets.

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and

the capacity of the meter or turn off one of the applian-

ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

the problem occurs again, contact an

Authorised Service Centre.

Possible cause and solution

• Refer to "Daily use", "Hints and tips" and the basket

loading leaflet.

• Use more intensive washing programme.

• Activate the ExtraPower option to improve the wash-

ing results of a selected programme.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

• Tableware was left for too long inside the closed ap-

pliance. Activate AirDry to set the automatic opening

of the door and to improve the drying performance.

• There is no rinse aid or the dosage of rinse aid is not

sufficient. Fill the rinse aid dispenser or set the level of

rinse aid to a higher level.

• The quality of the rinse aid can be the cause.

• We recommend to use rinse aid always, even in com-

bination with multi-tablets.

• Plastic items may need to be towel dried.

• The programme does not have the drying phase. Re-

fer to "Programmes overview".

• The released quantity of rinse aid is too high. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too high.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.