Garmin echo 151 Kurulum Talimatları - Sayfa 3

Denizcilik Ekipmanları Garmin echo 151 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Garmin echo 151 4 sayfaları.
Ayrıca Garmin echo 151 için: Kullanıcı El Kitabı (10 sayfalar)

Sayfayı Yazdır

There is an audible click when the locking bracket is correctly

installed.

Installing the Device in the Cradle

If your device uses a cradle and you have connected the cables

to the cradle, you can quickly place the device in the cradle

without plugging in any cables.

Place the base of the device in the bottom of the cradle.

Tilt the device toward the cradle until it fastens in place.

There is an audible click when the device is secured in the

cradle.

Removing the Device from the Cradle

If your device uses a cradle and you have connected the cables

to the cradle, you can quickly remove the device from the cradle

without unplugging any cables.

Press the release lever

released.

Tilt the device forward, and lift it out of the cradle.

Specifications

Specification

Models

Case

All models

Temperature

echo 101 and 201 series

Range

echo 301 and 501 series

on the cradle until the device is

Measurement

Fully gasketed,

high-impact plastic,

water resistant to

IEC 60529 IPX7

From 5° to 158°F

(from -15° to 70°C)

From 5° to 131°F

(from -15° to 55°C)

Specification

Models

Compass-Safe

echo 101, 151, and 201

Distance

echo 301c

echo 501c and 551c

Frequency

echo dv models

echo 101

echo 151, 201, 301, and 501

series

Power Source

echo 101 series

Voltage Range

echo 201, 301, and 501

series

Fuse

All models

Rated Current

All models

Transmit Power

echo 101 series

echo 201 and 301 series

echo 501 series

Selecting the Transducer Type

Before you can select the transducer type, you must know what

kind of transducer you have.

You may need to set the transducer type to make the sonar

function properly.

From a sonar view, select MENU > Setup > Sonar Setup >

Transducer Type.

Select an option:

• If you have a 200/77 kHz, dual-beam transducer, select

Dual Beam.

• If you have a 200/50 kHz dual-frequency transducer,

select Dual Frequency.

• If you have a DownVü transducer, select DownVü.

• If you have another type of transducer, select it from the

list.

Measurement

10 in. (250 mm)

13.8 in. (350 mm)

15.75 in. (400 mm)

50/77/200 kHz,

DownVü

200 kHz

50/77/200 kHz

from 10 to 20 V

from 10 to 28 V

AGC/3AG - 3.0 A

1 A

200 W (RMS),

1,600 W (peak-to-

peak)

300 W (RMS),

2,400 W (peak-to-

peak)

500 W (RMS),

4,000 W (peak-to-

peak)