AEG F55402VI0P Kullanıcı Kılavuzu - Sayfa 8
Bulaşık Makinesi AEG F55402VI0P için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG F55402VI0P 24 sayfaları.
Ayrıca AEG F55402VI0P için: Kullanıcı Kılavuzu (16 sayfalar)
Sayfayı Yazdır
8
www.aeg.com
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:
6. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
6.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt. The salt indicator does not come on.
This option also deactivates the release
of rinse aid but only when the rinse aid
dispenser is deactivated, (rinse aid
indicator does not come on). If the rinse
aid dispenser is activated, rinse aid is
released even with the option Multitab
activated.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press and hold simultaneously
and
until the indicator
The display shows the updated
programme duration.
Write down the product number (PNC)
that is on the rating plate.
How to use multi tablets
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Press the on/off button to activate
the appliance.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the
water hardness in your area.
6. Adjust the released quantity of rinse
aid.
6.2 Acoustic signals
The acoustic signals operate in these
conditions:
• When the programme is completed
• When he level of the water softener is
adjusted.
• When the appliance has a
malfunction.
How to deactivate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
comes on.
Factory setting: On. It is
possible to deactivate the
acoustic signals.
until the indicators
and
,