Garmin GMI 10 Kurulum Talimatları Kılavuzu - Sayfa 6

Denizcilik Ekipmanları Garmin GMI 10 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Garmin GMI 10 8 sayfaları. Flush moun template
Ayrıca Garmin GMI 10 için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar), Şablon (1 sayfalar), Talimatlar (2 sayfalar), Hızlı Başlangıç Kılavuzu (21 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar)

Garmin GMI 10 Kurulum Talimatları Kılavuzu
I
I
nstallatIon
nstructIons
Connecting the GMI 10 through NMEA 0183
The GMI 10 can receive NMEA 0183 data from one device. The GMI 10 displays the received data, but cannot transmit
the data to another NMEA 0183 device or transmit the data to a NMEA 2000 network.
Use the diagrams to wire a NMEA 0183 device to your GMI 10. Use 22 AWG, shielded, twisted-pair wiring for
extended runs of wire. Solder all connections and seal them with heat-shrink tubing.
GMI 10
Device
Examples:
GMI 10
Device
GMI 10
Device
Notes:
Consult the installation instructions for your NMEA 0183-compliant device to identify the Transfer (TX) A(+) and
B(-) wires.
If your NMEA 0183-compliant device has only one transmitting wire (Tx), connect it to the brown wire (Rx/A) from
the GMI 10, and connect the green wire (Rx/B) to ground.
The blue (Tx/A) and white (Tx/B) wires are used only when wiring the GMI 10 to a Garmin GPS 17/17x antenna.
The yellow (accessory on) wire is used only when wiring the GMI 10 to a Garmin GPS 17/17x antenna.
GMI 10 Power/Data Cable
WIRE
COLOR
Fuse
RED
1 A
BLACK
YELLOW
BLUE
>
WHITE
>
BROWN
>
GREEN
>
Wiring the GMI 10 to a GPS 17x NMEA 0183 HVS Antenna
WIRE
COLOR
RED
Fuse
BLACK
1 A
BROWN
>
GREEN
>
Wiring the GMI 10 to a Standard NMEA 0183 Device
Color
Fuse
Red
1 A
Black
Yellow
Blue
>
White
>
Brown
>
Green
>
-
+
Battery
WIRE
12 Vdc
COLOR
RED
BLACK
ORANGE
WHITE
WHITE/
ORANGE
GRAY
WHITE/
RED
-
+
Battery
WIRE
12 Vdc
RED
POWER GND
NMEA GND
Tx/A (+)
Tx/B (-)
Function
Power
Ground
Accessory On
Tx/A(+)
Tx/B(-)
Rx/A(+)
Rx/B(-)
GPS 17/17x
NMEA 0183
HVS Antenna
>
>
>
>
NMEA 0183
Compliant Device
>
>
GMI 10 Installation Instructions