Garmin GPS 19x NMEA 0183 Kurulum Talimatları Kılavuzu

Denizcilik Ekipmanları Garmin GPS 19x NMEA 0183 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Garmin GPS 19x NMEA 0183 19 sayfaları. Gps 19x hvs
Ayrıca Garmin GPS 19x NMEA 0183 için: Kurulum Talimatları Kılavuzu (8 sayfalar), Kurulum Talimatları Kılavuzu (48 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar)

GPS 24XD HVS NMEA

0183

INSTALLATION INSTRUCTIONS

Important Safety Information

CAUTION

To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,

cutting, or sanding.

NOTICE

When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.

For the best performance and to avoid damage to your boat, read all installation instructions before

proceeding. Install the device per these instructions. Use the appropriate fasteners, tools, and mounts listed,

which are available at most marine dealers.

The Garmin

GPS 24xd HVS (NMEA 0183) high-sensitivity GPS antenna provides position information over

NMEA 0183. The GPS 24xd can be connected to a Garmin chartplotter or another NMEA 0183 compliant

device.

For more information, go to garmin.com.

Tools Needed

• Drill

• 3.2 mm (1/8 in.) drill bit

• 19 mm (3/4 in.) drill bit for a pole-mount cable-hole

• 25 mm (1 in.) hole saw for a surface-mount cable-hole

• Countersink bit for mounting on fiberglass

• Screws for under-deck mounting

• Screwdriver, appropriate for the screw type

• Marine sealant (optional)

• Solder and shrink wrap for all wiring connections when limiting the antenna to 1 Hz

(Limiting the Antenna

Update Rate, page

14).

TA-2020/6796

June 2021

GUID-04C0F16F-F9A7-4EAC-96FC-C8DF7618E2D8 v3