AEG FAVORIT 146 Kullanım Talimatları Kılavuzu - Sayfa 16
Bulaşık Makinesi AEG FAVORIT 146 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG FAVORIT 146 20 sayfaları. Aeg dishwasher user manual
Ayrıca AEG FAVORIT 146 için: Kullanım Talimatları Kılavuzu (20 sayfalar)
Sayfayı Yazdır
What
to do lf...
If your dishwasher does not work, thls is
often due to small things, which you can
put right yourself.
1. The programme does not start
Have you plugged the machine in, have
you switched on the maln switch"?
Are the fuses alright?
Is the door closed properly?
Have
you
selected
the
correct
pro-
gramme?
2. No water or too little water.
Have you turned the tap on?
Is the water filter In the filler hose clean?
It needs cleaning from time to time.
Is the water pressure sufficient?
This fault may also occur If incoming wa-
ter is drained due to the drain hose being
lower than the required 30 cm. from the
base of the machine.
Secure the outlet
hose
at the
correct
height and to start the machine, supply
enough water to cover the heating ele-
ment. Then start the programme.
3. The water immediately runs out again
from the outlet hose.
Is the outlet hose at least 30 cm above the
basa of the appliance?
Ensure that the
bend at the end of tha hose Is not Im-
mersed in tha pumped off water.
4. Dishes not clean
Did you select the correct programme?
Did you use sufficient detergent? Did you
use the recommended detergent?
Did you add the detergent correctly?
Did you stack the dishes correctly?
Where
the spray
arms
able
to rotate
without obstruction?
16
5. Dishes not sparking clean.
Did you use a rinse aid recommenda
by us?
15 the correct quantity of rinse aid bein:
dispensed?
If too Пе
is used, marks are left, if to
much is used, the dishes ara smeared.
Was the screw cap of the salt containe
fastened securely?
Did you add salt for the water softener ii
time?
If you forget this once ihe water softene
will work efficiantly асап by adding salt
. After filling with salt, set the programme ii
motion by pressing the "automatic reset
button until tha hand of the programm:
indicator reaches the final rinse symbol.
Press the intenslve button to set the re
maining
programme
in
motion.
Fo
degrees of water hardness
up to 20° @
temporarily set the slider at green, thail
ra-set to orange or yellow.
Please use these hints for the smooth ал
satisfactory operation of the machine.
If you wish to avail yourself of our custo
mer service to rectify ona of the аром
faults, the necessary services cannot bi
supplled free.
of. charge, even during thi
guarantee period. In other respects, plea
ве see the guarantee terms as set out її
the
Customer
Service
Booklet.
If yor
cannot establish the cause of a fault, ge
in touch wlth our Customer Service Divi
sion. You will make their job easier if yol
are abla to give them the E-No. and thi
serial number of the machine, which ус!
will find on the rating plate under th:
worktop.
The AEG Comprehensive Service Contrac
offers you a wider guarantee. For a smal
annual payment you can sign a servicing
contract wlth our Customer Service Divi-
sion up to the 10th year of using your
appliances.
This
guarantees
you
free
rectification of all faults which may occur
In your appliance.