AEG FAVORIT 35010 VI Kullanıcı Kılavuzu - Sayfa 41

Bulaşık Makinesi AEG FAVORIT 35010 VI için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG FAVORIT 35010 VI 48 sayfaları.

Sayfayı Yazdır

1. What to Do if

If there is a fault, first try to find a solution to the problem yourself. If you cannot find a

solution to the problem yourself, contact the Service Force Centre.

CAUTION!

Switch off the appliance before you do the below suggested corrective actions.

Fault code and malfunction

• continuous flash of the light of

the running programme

• intermittent audible signal

• 1 flash of the end-of-pro-

gramme indicator light

The appliance does not fill with wa-

ter

• continuous flash of the light of

the running programme

• intermittent audible signal

• 2 flashes of the end-of-pro-

gramme indicator light

The appliance will not drain the wa-

ter.

• continuous flash of the light of

the running programme

• intermittent audible signal

• 3 flashes of the end-of-pro-

gramme indicator light

Anti-flood device operates

The programme does not start

After the check, switch on the appliance. The programme continues from the point of

interruption. If the malfunction shows again, contact your Service Force Centre.

For other fault codes, not described in the chart, contact your Service Force Centre.

These data are necessary to help you quickly and correctly:

• Model (Mod.)

• Product number (PNC)

• Serial number (S.N.)

For these data, refer to the rating plate.

Write the necessary data here:

Possible cause and solution

• The water tap is blocked or furred with limescale.

Clean the water tap.

• The water tap is closed.

Open the water tap.

• The filter in the water inlet hose is blocked.

Clean the filter.

• The connection of the water inlet hose is not correct. The

hose can be kinked or squashed.

Make sure that the connection is correct.

• There is a blockage in the sink spigot.

Clean the sink spigot.

• The connection of the water drain hose is not correct. The

hose can be kinked or squashed.

Make sure that the connection is correct.

• Close the water tap and contact your local Service Force

Centre.

• The appliance door is not closed.

Close the door.

• Mains plug is not connected in.

Put in the mains.

• The fuse has blown out in the household fuse box.

Replace the fuse.

• Delay start is set.

Cancel the delay start to start the programme immedi-

ately.

What to do if...