AEG Favorit 35020I Kullanıcı Kılavuzu - Sayfa 18

Bulaşık Makinesi AEG Favorit 35020I için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG Favorit 35020I 48 sayfaları.

12. To lock the filter system, turn the handle

on the microfilter (B) clockwise until it

lock in position.

13. Install the lower basket.

14. Close the door.

Do not remove the spray arms.

If the holes in the spray arms become clog-

ged, remove remaining parts of soil with a

cocktail stick.

External cleaning

Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only

use neutral detergents. Do not use abrasive products, scouring pads or solvents (acetone,

trichloroethylene etc...).

CAUTION!

Do not install the appliance where the temperature is below 0 °C. The manufacturer is not

responsible for damage because of frost.

If not possible, empty the appliance and close the door. Disconnect the water inlet hose

and remove water from the water inlet hose.

What to do if...

The appliance does not start or stops during operation.

If there is a fault, first try to find a solution to the problem yourself. If you cannot find a

solution to the problem yourself, contact the Service Force Centre.

CAUTION!

Switch off the appliance before you do the below suggested corrective actions.

Fault code and malfunction

• continuous flash of the start/

cancel indicator light

• 1 flash of the end-of-pro-

gramme indicator light

The dishwasher does not fill with

water

Possible cause and solution

• The water tap is blocked or furred with limescale.

Clean the water tap.

• The water tap is closed.

Open the water tap.

• The filter in the water inlet hose is blocked.

Clean the filter.

• The connection of the water inlet hose is not correct. The

hose can be kinked or squashed.

Make sure that the connection is correct.