AEG FAVORIT 40630 Kullanıcı Talimatları - Sayfa 11
Bulaşık Makinesi AEG FAVORIT 40630 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. AEG FAVORIT 40630 48 sayfaları. Electrolux group. user instructions dishwasher favorit 40630
Ayrıca AEG FAVORIT 40630 için: Kullanıcı Talimatları (44 sayfalar)
Sayfayı Yazdır
1) (°d) German degree, measure of the hardness of water
2) [mmol/l] millimol per litre, international unit for the hardness of water
3) On this setting the length of the wash programme may be slightly longer.
*) factory setting
Setting the water softener
Using the table as a guide, adjust the water softener to that which cor-
responds to the hardness of the water in your area:
0
The dishwasher must be switched off.
Setting manually:
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the hardness range switch to 0
or 1 (see table).
4. Replace the lower basket.
Setting electronically:
1. Press the ON/OFF button.
The ON/OFF button's LED will illuminate.
If other indicators are also illuminated, this means that a wash pro-
3
gramme has been started. The wash programme must be cancelled
(RESET):
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
All other indicators will go out.
2. Press function buttons 2 and 3 simultaneously and keep them
pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 1.
The LED indicator for function button 1 will flash.
The LED indicator for the end of the wash programme will flash simul-
taneously:
– The number of times that the LED indicator for the end of the wash
programme flashes corresponds to the hardness setting.
– This sequence of flashes is repeated many times, with a 3 second
pause in between.
4. Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5. When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
Operating Instructions
11