Garmin GWS 10 Marine Wind Sensor Teknik Referans - Sayfa 41

Denizcilik Ekipmanları Garmin GWS 10 Marine Wind Sensor için çevrimiçi göz atın veya pdf Teknik Referans indirin. Garmin GWS 10 Marine Wind Sensor 42 sayfaları. Marine sensor
Ayrıca Garmin GWS 10 Marine Wind Sensor için: Kurulum Talimatları Kılavuzu (43 sayfalar), Kurulum Talimatları Kılavuzu (44 sayfalar), Önemli Güvenlik Bilgileri (48 sayfalar), Yapılandırma Kılavuzu (2 sayfalar), Uygunluk Beyanı (1 sayfalar), Kurulum Talimatı (42 sayfalar)

Garmin GWS 10 Marine Wind Sensor Teknik Referans
Configuring the Wind Angle Filter
The wind angle filter governs how quickly the NMEA 2000-compatible display device shows a change in the wind angle. A lower filter setting
shows changes in the wind angle more gradually, and may stabilize the display.
To configure the wind angle filter:
1. While viewing the NMEA 2000 device information, select
2. Choose from the following options to adjust the filter settings.
Off—the wind angle data is not filtered.
On—select a lower number to update the display device less often, and help the gauge needle or wind angle number to move or change
more steadily.
Auto—automatically adjusts the filter settings based on wind conditions.
Configuring the GWS 10 if the Filter and Offset Selections Are Not Displayed
Depending on the version of software loaded on your Garmin marine instrument, the specific configuration options may not be displayed on the
configuration screens.
To configure the wind angle offset if the menu option is not displayed:
1. Select
Generic Configuration
2. Enter the following command: "ANGLEOFFSET="
3. Follow the command with a number between 0 and 359, in degrees (for example: ANGLEOFFSET=180).
To configure the wind angle filter if the menu option is not displayed:
1. Select
Generic Configuration
2. Enter the following command: "ANGLEFILTER="
3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the
Automatic setting (for example: ANGLEFILTER=12).
To configure the wind speed filter:
1. Select Generic Configuration to specify data for the filter and offset settings.
2. Enter the following command: "SPEEDFILTER="
3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the
Automatic setting (for example: SPEEDFILTER=215).
Technical Reference for Garmin NMEA 2000 Products
Config
to specify data for the filter and offset settings.
to specify data for the filter and offset settings.
>
Wind Angle
Filter.

NMEA 2000 Checklist

7