Garmin NMEA 2000 Teknik Referans - Sayfa 4

Denizcilik Ekipmanları Garmin NMEA 2000 için çevrimiçi göz atın veya pdf Teknik Referans indirin. Garmin NMEA 2000 20 sayfaları. Technical reference for garmin nmea 2000 products
Ayrıca Garmin NMEA 2000 için: Kurulum Talimatları Kılavuzu (10 sayfalar), Veri Sayfası (1 sayfalar), Teknik Referans (30 sayfalar), Teknik Referans (42 sayfalar), Talimatlar Kılavuzu (20 sayfalar), Kurulum Talimatları Kılavuzu (40 sayfalar), Referans (42 sayfalar)

NMEA 2000 Network Planning and Construction

The backbone is the main communication channel of an NMEA 2000 network to which your NMEA 2000

devices connect. You must connect each NMEA 2000 device to the backbone using a T-connector. You must

connect the NMEA 2000 backbone to a power source, and you must install terminators at both ends of the

network for proper functionality.

When you design an NMEA 2000 network, you should start by creating a diagram of the network. When creating

the diagram, be as detailed as possible, observing these considerations.

• You should include all of the devices you intend to connect to the network.

• You should note the approximate location on the boat for the backbone and each of the connected devices.

• You should measure the distances between the location of each device and the backbone, and you should

measure the overall length of the backbone.

• You should note the power consumption (LEN) of each connected device.

After you create a diagram of your network, you should apply the principles of proper NMEA 2000 network

construction and adjust your plan as needed. You must understand and apply these concepts.

• Linear backbone construction

(Linear Backbone Construction, page

• Power connection and distribution

(Power Connection Considerations, page

• Proper network termination

(Network Termination, page

11)

• Cable length and device limits

(NMEA 2000 Cable Length and Device Limitations, page

12)