AEG FAVORIT 40850 Kullanıcı Bilgileri - Sayfa 30

Bulaşık Makinesi AEG FAVORIT 40850 için çevrimiçi göz atın veya pdf Kullanıcı Bilgileri indirin. AEG FAVORIT 40850 48 sayfaları. Electrolux user information dishwasher 40850
Ayrıca AEG FAVORIT 40850 için: Kullanıcı Bilgileri (40 sayfalar)

Sayfayı Yazdır

What to do if...

Remedying small malfunctions

If one of the following fault codes is displayed in the multi-display dur-

ing operation:

– Fault codeÅ 10 (Problems with water inlet),

– Fault codeÅ 20 (Problems with water drainage),

please have a look at the following table.

When the fault is remedied, press the button for the cycle that has

started. The cycle will continue.

With other fault codes ("Å " followed by a number):

– Abort the dishwashing cycle.

– Switch the appliance off and on again.

– Re-set the dishwashing cycle.

If the fault is displayed again, please contact your local Service Force

Centre and inform them of the fault code.

Malfunction

The cycle indicator for the

selected dishwashing cycle

is flashing:

the control indicator WA-

TER is lit,

fault code

played in the multi-display

(Problems with water in-

let).

The cycle indicator for the

selected dishwashing cycle

is flashing,

fault code

played in the multi-display

(there is water in the dish-

washer's internal dispens-

er).

Water tap is blocked with

limescale or faulty.

The tap is turned off.

The filter (where present) in

the threaded hose fitting

on the tap is blocked.

Å 10

is dis-

Filters in the base of the

washing compartment are

blocked.

Water inflow hose

has not been correctly posi-

tioned.

The sink outlet is blocked.

Å 20

is dis-

Water drain hose

has not been correctly posi-

tioned.

Possible cause

Remedy

Check the water tap and

have it repaired if necessary.

Turn the tap on.

Clean the filter in the

threaded hose fitting.

Cancel the dishwashing cy-

cle (see chapter: Starting a

dishwashing cycle),

clean filters (see chapter:

Cleaning the filters),

then start the dishwashing

cycle again.

Check the position of the

hose.

Clean out sink outlet.

Check the position of the

hose.