Garmin Reactor 40 Kurulum Talimatları Kılavuzu

Denizcilik Ekipmanları Garmin Reactor 40 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Garmin Reactor 40 29 sayfaları. Mechanical
Ayrıca Garmin Reactor 40 için: Kurulum Talimatları Kılavuzu (11 sayfalar), Kurulum Talimatları Kılavuzu (13 sayfalar), Yapılandırma Kılavuzu (8 sayfalar), Kurulum Talimatları Kılavuzu (25 sayfalar)

REACTOR

40 KICKER

™

INSTALLATION INSTRUCTIONS

Important Safety Information

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other

important information.

You are responsible for the safe and prudent operation of your vessel. The autopilot is a tool that enhances your

capability to operate your boat. It does not relieve you of the responsibility of safely operating your boat. Avoid

navigational hazards and never leave the helm unattended.

Always be prepared to promptly regain manual control of your boat.

If your motor features a kill switch, you should know how to operate it in case of an emergency. If your motor

does not feature a kill switch, you should install one before installing the autopilot system.

Learn to operate the autopilot on calm and hazard-free open water.

Use caution when operating the autopilot near hazards in the water, such as docks, pilings, and other boats.

CAUTION

When in use, beware of hot surfaces on the heat-sink, motor, and solenoid components.

When in use, beware the risk of entrapment or pinching from moving parts.

Failure to install and maintain this equipment in accordance with these instructions could result in damage or

injury.

Installation Preparation

The autopilot system consists of multiple components. You should familiarize yourself with all of the

component mounting and connection considerations before beginning installation. You must know how the

components operate together in order to correctly plan the installation on your boat.

You can consult the layout diagrams to help understand the mounting and connection considerations.

You should lay out all of the components on the boat as you plan the installation to make sure your cables will

reach each component. If needed, extension cables (sold separately) for various components are available from

your Garmin

dealer or from www.garmin.com.

You should record the serial number of each component for registration and warranty purposes.

January 2022

GUID-EF2BAA44-88E5-4854-882C-9A77AB104F05 v3