AEG FAVORIT 40860 i Kullanıcı Talimatları - Sayfa 11
Bulaşık Makinesi AEG FAVORIT 40860 i için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. AEG FAVORIT 40860 i 44 sayfaları. Aeg dishwasher user manual
Ayrıca AEG FAVORIT 40860 i için: Kullanıcı Bilgileri (48 sayfalar)
Adjust the water softener
To avoid the scale deposits on the dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content, water. The dish-
washer therefore has a built-in water softener, in which tap water from
a hardness of 4 °d (German degree) is softened with the aid of special salt.
You water supplier will be able to inform you on the hardness and
3
hardness range of the water in your area.
0
Adjust the water softener to the setting that corresponds to the hard-
ness of the water in your area. The water softener can be adjusted in
10 steps.
Water Hardness
1
in °d
)
41-50
35-40
31-34
27-30
23-26
19-22
15-18
11-14
4-10
under 4
1)(°d) German degree, measure of the hardness of water
2)(mmol/l) millimol per litre, international unit for the hardness of water
*factory setting
0
1. The dishwasher must be switched off.
2. Press the function and water softener buttons simultaneously and keep
them pressed
3. In addition press the ON/OFF switch
The LED indicators for the function and water softener buttons flash.
4. Press the softener button again.
The water softener button indicator starts to flash.
– The number of flashes corresponds to the hardness setting. (Excep-
tion: hardness setting 0 is indicated by 10 flashes).
– The sequence of flashes is repeated after a 5 second pause.
2
in mmol/l
) Range
7.3-9.0
6.3-7.2
5.5-6.2
IV
4.8-5.4
4.1-4.7
3.3-4.0
III
2.6-3.2
1.9-2.5
II
0.7-1.8
I/II
under 0.7
I
Operating Instructions
Adjust
to Hardness Setting
9
8
7
6
5
4
3*
2
1
0
no salt necessary
M
.
Number of
Flashes
9
8
7
6
5
4
3
2
1
10
11