AEG FAVORIT 44080 I Kullanıcı Kılavuzu - Sayfa 27

Bulaşık Makinesi AEG FAVORIT 44080 I için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG FAVORIT 44080 I 40 sayfaları. Electrolux user instructions dishwasher favorit 44080 i
Ayrıca AEG FAVORIT 44080 I için: Kullanıcı Bilgileri (48 sayfalar), Kullanıcı Bilgileri (40 sayfalar)

Sayfayı Yazdır

If the dishwashing results are not satisfactory

The dishes are still dirty.

• The wrong dishwashing cycle was selected.

• The dishes were loaded is such a way that the dishwashing water did not

reach all items. The baskets for the dishes must not be overloaded.

• Filters in the floor of the dishwasher are not clean or incorrectly inserted.

• Good quality detergent was not used, or too little was used.

• In the case of scale deposits on the dishes: The special salt dispenser is empty

or the water softening system has been incorrectly set.

• The drain hose is incorrectly positioned.

• If at the end of the dishwashing cycle there is still detergent left in the deter

gent dispenser, either the spray arm was jammed or the spray arm jets are

blocked with pollutants in the dishwashing water.

You have the option of removing the spray arms from their fixture for clean

ing (see section "Care and Cleaning").

The dishes do not dry and are not shining.

• Poor quality rinse aid was used.

• The rinse aid dispenser is empty.

There are smears, streaks, milky spots or a shiny bluish coating on glasses

and dishes.

• Lower rinse aid dosage.

There are dried water drops on the glasses and dishes.

• Increase rinse aid dosage.

• The detergent may be the cause. Contact the detergent manufacturer's cus

tomer advice centre.

Glass corrosion

• Contact the detergent manufacturer's customer advice centre.

What to do if...