Garmin GTX 345 Series Pilot El Kitabı - Sayfa 21
Deniz Telsizi Garmin GTX 345 Series için çevrimiçi göz atın veya pdf Pilot El Kitabı indirin. Garmin GTX 345 Series 36 sayfaları. All-in-one ads-b transponder
Sayfayı Yazdır
3.4.1
Bluetooth Pairing Instructions
For first time activation of Bluetooth devices:
1. Go to the GTX 345 Bluetooth page to enable pairing mode. Refer to figure 3-3. If
connected to a GTN or GX000 via HSDB, refer to the display's pilot's guide.
2. Enable Bluetooth on the PED.
3. Select "GTX 345" from the list of available devices on the PED. Refer to
manufacturer's information for pairing instructions.
4. When a PED sends a pairing request the Bluetooth Pair Request page will display
the device name and passkey. Refer to figure 3-4.
5. Press ENT on the GTX 345 and accept the pairing request on PED.
3.4.2
Bluetooth Paired Device Information
To view the paired device list:
1. Press the CRSR key.
To view the menu and pairing status:
1. Press the 8 and 9keys, respectively.
2. Then press the ENT key.
The Paired Devices list page will display. Refer to figure 3-5.
More information about each paired device and applicable settings can be found by doing
the following steps:
To set the auto-reconnect status:
1. Highlight the paired device.
2. Then press ENT key. Refer to figure 3-6.
190-01499-00 Rev. C
Figure 3-3 Bluetooth Page
Figure 3-4 Bluetooth Pair Request Page
Figure 3-5 Paired Device List Page
Figure 3-6 Auto-reconnect Page
GTX 335/345 Pilot's Guide
GTX 3X5 XPDR
1 – GTX 3X5 SERIES XPDR
3-5