Garmin Alpha 100 T5 Kullanıcı El Kitabı - Sayfa 11

Evcil Hayvan Bakım Ürünü Garmin Alpha 100 T5 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Alpha 100 T5 26 sayfaları.

Garmin Alpha 100 T5 Kullanıcı El Kitabı
You can use an emergency alert when you need immediate
assistance and you are away from your group.
Select
> Contacts >
When your contact accepts your emergency alert request,
the device displays a message indicating that your contact
has started navigating to your location.
After receiving the alert, your contacts can navigate to your
location.

Sending a Message to Your Contacts

You can send and receive automated messages. There are 18
messages choose from, such as "Help" and "I'm Coming."
1
Select
> Contacts > Message.
2
Select a message.
The message is sent to your contacts with your name before the
message. Anyone tracking your handheld device receives the
message.
Tracking a Contact
You can keep track of contacts' locations using the map.
Select
.
Finding Your Contact ID
Select Setup > Contacts > Pairing Setup.
The contact ID for your handheld device is listed under ID.
Changing Your Contact ID
If you are experiencing interference from other collars or
handheld devices in the area, you might need to change the
contact ID for your handheld device.
1
Select Setup > Contacts > Pairing Setup > ID.
2
Select a contact ID that is not yet assigned to another device
in the area.
If you select a contact ID that interferes with devices in the
area, you should select a new contact ID.
Each time a contact changes their contact ID, you must update
the contact ID in your handheld
page
7).
Updating a Contact ID
If a contact has changed their contact ID
Contact ID, page
7), you can quickly update the contact ID in
your handheld device.
1
Select
> Contacts.
2
Select the contact.
3
Select Show Info.
4
Select
> Change ID.
5
Select the contact ID that matches the contact's new contact
ID.
Hunting with the Alpha System
You can perform many tasks that are very helpful when you are
hunting with the Alpha system.
• Mark your truck's location
page
7).
• Track your dogs
(Tracking Your Dog on the Map, page
• Track your fellow hunters
• Mark the location of a covey
• Send messages to your fellow hunters
to Your Contacts, page
Hunting with the Alpha System
> Yes.
device(Updating a Contact ID,
(Changing Your
(Marking Your Truck Location,
(Tracking a Contact, page
(Marking a Covey, page
(Sending a Message
7).
• Turn on the collar light
page
7).
• Put the collar into rescue mode to save battery power
(Turning On Rescue Mode, page
• Pause tracking while you move the dogs
Tracking, page
Marking Your Truck Location
You can mark the location of the truck, so you can navigate
back to your truck after the hunt.
1
Select New Hunt.
2
Follow the on-screen instructions.
Marking a Covey
You can mark a covey location and enter the estimated number
of birds flushed and the number of birds taken.
1
Select Mark.
2
Select Covey.
3
Enter the number of birds flushed.
4
Enter the number of birds taken.
5
Select OK.
Turning On the Collar Light
You can turn on the LEDs on the collar at night to help locate a
dog or to warn drivers if a dog wanders near a road. The light is
visible for up to 100 yards.
1
Select Dog List.
2
Select a dog.
3
Select Show Info.
4
Select
> Adjust Collar Light.
5
Select Continuous, Blink Slow, or Blink Fast.
TIP: Select different light setting for each dog to help you
identify the dogs in the field.
Turning On Rescue Mode
You can turn on rescue mode to conserve battery power at the
end of a long hunt or if your dog might get out of range.
1
Select Dog List.
2
Select a dog.
3
Select Show Info >
After you have turned on rescue mode, it stays on until you turn
it off.
When the collar battery power falls below 25%, the collar data
updates only once every 2 minutes.
Waypoints, Routes, and Tracks
Waypoints
Waypoints are locations you record and store in the device.
Marking Your Current Location
1
Select Mark.
2
Select an option:
• Select New.
• Select a default location name, such as Truck or Camp.
4).
3
Select Save.
7).
7).
Marking a Waypoint Using the Map
1
Select
.
2
Select the location on the map.
3
Select the information bar along the top of the screen.
(Turning On the Collar Light,
7).
(Pausing Dog
5).
> Rescue Mode.
7