Garmin Alpha 200i Kullanıcı El Kitabı - Sayfa 21

Evcil Hayvan Bakım Ürünü Garmin Alpha 200i için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Alpha 200i 29 sayfaları. With training

Sayfayı Yazdır

Wireless frequencies/

1.6 GHz @ 31.7 dBm nominal, 152-155 MHz

protocols

@ 31.6 dBm nominal, 2.4 GHz @ 23.1 dBm

nominal

Water rating

1 ATM

TT 15 mini Dog Collar Device Specifications

Battery type

Rechargeable, replaceable lithium-ion

Battery life

Up to 16 to 30 hr., typical use

Operating temperature

From -20° to 60°C (from -4° to 140°F)

range

Charging temperature

From 5° to 40°C (from 41° to 104°F)

range

ANT wireless range

Up to 5 m (16.4 ft.)

VHF radio range

Up to 6.44 km (4 mi.)

Wireless frequencies/

1.6 GHz @ 31.7 dBm nominal, 152-155 MHz

protocols

@ 31.6 dBm nominal, 2.4 GHz @ 23.1 dBm

nominal

Water rating

1 ATM

Battery Information

This product contains a lithium-ion battery. To prevent the

possibility of personal injury or product damage caused by

battery exposure to extreme heat, store the device out of direct

sunlight.

Do not use a sharp object to remove batteries.

Contact your local waste disposal department to properly

recycle the batteries.

Long-Term Storage

The normal long-term decrease in the charging capacity of

lithium-ion batteries can be accelerated by exposure to elevated

temperatures. Storing a fully charged device in a location with a

temperature outside the long-term storage temperature range

can significantly reduce its recharging capacity.

When you do not plan to use the handheld device for several

months, the battery should be removed. Stored data is not lost

when the battery is removed.

When you do not plan to use the collar for several months, the

battery should be charged to about 50%. The device should be

stored in a cool, dry place with temperatures around the typical

household level. After storage, the collar should be fully

recharged before use.

Maximizing the Battery Life

You can do several things to extend the life of the batteries in

the handheld device and collar.

• Reduce the backlight brightness

Brightness, page

17).

• Reduce the backlight timeout

Timeout, page

17).

• Turn off the transmitter

page

10).

• Use battery save mode

Save Mode, page

17).

• Put the dog collar device into rescue mode to conserve the

collar battery

(Turning On Rescue Mode, page

The device withstands pressure equivalent to a depth of 10 m. For more

information, go to www.garmin.com/waterrating.

Device Information

WARNING

CAUTION

NOTICE

(Adjusting the Backlight

(Turning On and Off the Transmitter,

(Turning On the Handheld Battery

11).

• Extend the duration for the collar update rate to conserve the

collar battery

(Changing the Dog Collar Device Update Rate,

page

17).

Adjusting the Backlight Brightness

Extensive use of screen backlighting can significantly reduce

battery life. You can adjust the backlight brightness to maximize

the battery life.

NOTE: The backlight brightness may be limited when the

battery is low.

Select

Use the slider bar to adjust the backlight brightness.

The device may feel warm when the backlight setting is high.

Adjusting the Backlight Timeout

You can decrease the backlight timeout to maximize the battery

life.

Select Setup > Display > Backlight Timeout.

Select an option.

Changing the Dog Collar Device Update Rate

Before you can change the collar update rate, the collar must be

turned on and within range of the handheld device.

You can select a longer duration for the update rate to conserve

battery power.

Select Dog List.

Select a dog.

Select Update Rate.

Select an option.

Turning On the Handheld Battery Save Mode

You can use battery save mode to prolong the battery life.

Select Setup > Display > Battery Save > On.

When in battery save mode, the screen shuts off when the

backlight times out.

Saving Energy While Charging the Device

You can turn off the device display and all other features while

charging.

Connect your device to an external power source.

The remaining battery capacity appears.

Hold the power key for 4 to 5 seconds.

The display turns off, and the device goes into a low power,

battery charging mode.

Charge the device completely.

Data Management

The device has a memory card slot for additional data storage.

NOTE: The device is compatible with Windows

and Mac

OS 10.4 and newer.

Installing a Memory Card

Do not use a sharp object to remove user-replaceable batteries.

You can install a microSD memory card in the handheld device

for additional storage or pre-loaded maps.

Turn the D-ring counter-clockwise, and pull up to remove the

cover.

Remove the battery.

Slide the card holder to the left and lift up.

7 and newer,

WARNING