AEG FAVORIT 50860 i Kullanıcı Talimatları - Sayfa 31
Bulaşık Makinesi AEG FAVORIT 50860 i için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. AEG FAVORIT 50860 i 48 sayfaları. Aeg dishwasher
Ayrıca AEG FAVORIT 50860 i için: Kullanıcı Bilgileri (44 sayfalar), Kullanıcı Bilgileri (44 sayfalar)
Sayfayı Yazdır
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer's visit is not free of
charge, even during the period of guarantee.
...Error messages are displayed.
If any of the indicators in the control panel, as listed in the table below,
are flashing or are illuminated, you can probably rectify the fault your-
self.
Malfunction
The cycle indicator for the
selected dishwashing cycle
is flashing: error code
is displayed in the multi-dis-
play: There is no water run-
ning into the dishwasher.
Possible cause
The tap is blocked or furred
with lime-scale
The tap is turned off.
The filter (where present) in
the threaded hose fitting at
the water inlet valve is
blocked.
Å 10
Filters in the base of the
washing compartment are
blocked.
The water inlet hose has not
been correctly laid.
Operating Instructions
Remedy
Clean tap
Turn the tap on.
Clean the filter in the
threaded hose fitting.
Press the button for the
commenced dishwash-
ing cycle; then abort the
dishwashing cycle by
pressing RESET (see
chapter: "Starting a
dishwashing cycle");
clean out the filters (see
chapter: "Cleaning the
filters").
Check hose installation.
31