AEG FAVORIT 50874 Kullanıcı Kılavuzu - Sayfa 20

Bulaşık Makinesi AEG FAVORIT 50874 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG FAVORIT 50874 28 sayfaları. Electrolux dishwasher favorit 50874

Sayfayı Yazdır

What to do if...

If the holes in the spray arms become clogged, remove remaining parts of soil with a cocktail

stick.

To clean the external surfaces

Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only

use neutral detergents. Do not use abrasive products, scouring pads or solvents (e.g. ace-

tone).

What to do if...

The appliance does not start or stops during operation.

First try to find a solution to the problem (refer to the chart). If not, contact the service

centre.

Malfunction

The appliance does not

fill with water.

The appliance does not

drain the water.

The anti-flood device

operates.

The programme does

not start.

Fault code

The display shows

Possible cause

The water tap is

blocked or is furred

with limescale.

The water pressure is

too low.

The water tap is closed. Open the water tap.

The filter in the water

inlet hose is blocked.

The connection of the

water inlet hose is not

correct.

The water inlet hose is

damaged.

There is a blockage in

the sink spigot.

The connection of the

water drain hose is not

correct.

The water drain hose is

damaged.

The appliance door is

open.

The mains plug is not

connected in.

Possible solution

Clean the water tap.

Contact your local wa-

ter authority.

Clean the filter.

Make sure that the

connection is correct.

Make sure that the wa-

ter inlet hose has no

damages.

Clean the sink spigot.

Make sure that the

connection is correct.

Make sure that the wa-

ter drain hose has no

damages.

Close the water tap

and contact the serv-

ice centre.

Close the door correct-

ly.

Put in the mains plug.