AEG FAVORIT 60820 Kullanıcı Bilgileri - Sayfa 25

Bulaşık Makinesi AEG FAVORIT 60820 için çevrimiçi göz atın veya pdf Kullanıcı Bilgileri indirin. AEG FAVORIT 60820 44 sayfaları. Favorit 60820 dishwasher
Ayrıca AEG FAVORIT 60820 için: Kullanıcı Talimatları (44 sayfalar)

Sayfayı Yazdır

3. Place cleaned upper basket spray arm

back in position against the connect-

ing piece: press the two together

firmly, until you feel them snap into

place.

Bottom spray arm

1. To remove bottom spray arm, pull it

upwards out of its catch.

2. Clean spray arm jets.

3. Place bottom spray arm back in posi-

tion against connecting piece and

press down firmly, until you feel it

snap into place.

What to do if...

Remedying small malfunctions

If one of the following fault codes is displayed in the multi-display dur-

ing operation:

– Fault codeÅ 10 (Problems with water inlet),

– Fault codeÅ 20 (Problems with water drainage),

please have a look at the following table.

When the fault is remedied, press the button for the cycle that has

started. The cycle will continue.

With other fault codes ("Å " followed by a number):

– Abort the dishwashing cycle.

– Switch the appliance off and on again.

– Re-set the dishwashing cycle.