Brother DCP 7065DN Gelişmiş Kullanıcı Kılavuzu - Sayfa 23

Hepsi Bir Arada Yazıcı Brother DCP 7065DN için çevrimiçi göz atın veya pdf Gelişmiş Kullanıcı Kılavuzu indirin. Brother DCP 7065DN 33 sayfaları. Quick setup guide - english
Ayrıca Brother DCP 7065DN için: Hızlı Kurulum Kılavuzu (20 sayfalar), Hızlı Kurulum Kılavuzu (20 sayfalar), Gelişmiş Kullanıcı Kılavuzu (24 sayfalar), Temel Kullanım Kılavuzu (5 sayfalar)

• If the machine receives a print job before

you put the sheet of paper in the manual

feed slot, the machine will finish the Drum

Cleaning process first, and then print the

print job.

When the machine has finished

cleaning, the machine returns to Ready

mode.

Repeat steps e to h two more times

using a new blank sheet of paper each

time. Upon completion please discard

the used paper.

If the problem is not solved yet, follow the

steps below.

Open the front cover and leave the

machine turned on for 10 minutes to

cool down.

WARNING

HOT SURFACE

After you have just used the machine, some

internal parts of the machine will be

extremely hot. When you open the front or

back cover (back output tray) of the

machine, DO NOT touch the shaded parts

shown in the illustration. If you do this, you

may get burned.

Routine maintenance

Slowly take out the drum unit and toner

cartridge assembly.

CAUTION

We recommend that you put the drum unit

and toner cartridge assembly on a clean,

flat surface with a sheet of disposable

paper or cloth underneath it in case you

accidentally spill or scatter toner.