LG 441G Manuel

Cep Telefonu LG 441G için çevrimiçi göz atın veya pdf Manuel indirin. LG 441G 22 sayfaları. By tracfone
Ayrıca LG 441G için: Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır
LG 441G Manuel
LOCATE THE ACTIVATION CARD
INSIDE YOUR PACKAGE FIRST
PLEASE RECYCLE
Printed in the U.S.A.
SERVICES
GUIDE
LG 441G
For more information and the
latest Terms and Conditions
of Service, visit TracFone.com
START HERE
PREPARE YOUR PHONE FOR ACTIVATION
®
1. REMOVE SCREEN PROTECTORS FROM YOUR PHONE
PLEASE READ THE TERMS AND CONDITIONS OF SERVICE IN THE
Remove all protectors from the screen and other locations
SERVICES GUIDE IN THIS PACKAGE (or at TracFone.com) BEFORE
on the phone by peeling them off. You will not be able to
ACTIVATING YOUR PHONE OR ANY SERVICE PLANS.
see your phone screen until you remove the screen protector.
1. Remove protectors from your phone.
2. INSTALL THE BATTERY AND BACK COVER.
2. Install the battery, put the back cover on and begin charging
BEGIN CHARGING YOUR PHONE.
your phone.
A.
Insert the battery so that the metal bars on the battery are
3. Turn your phone ON by pressing and holding the PWR/LOCK key
touching the metal pins on the phone. Put the back cover on.
until the screen lights up.
4. Once Steps 1 – 3 have been completed, you will be ready to Activate.
Go to TracFone.com or call 1-800-867-7183 from another phone.
FPO
Find more details inside this card.
Questions? Visit TracFone.com or call 1-800-867-7183.
B.
Locate the Charger/USB dock on the
bottom edge
Insert the charger's adapter end into the Charger/USB dock then
THE FOLLOWING IS YOUR SERIAL NUMBER:
plug the charger into an electrical outlet.
FPO
TIP:
You can Activate your phone while charging. To get the most out of
your battery life, charge your phone for 5 hours during initial setup.
QUAG-TF441G
3. TURN YOUR PHONE ON
FPO
To turn your phone ON
hold the
PWR/END key
on the right side
of the
until the screen lights u
of the phone.
4. ACTIVATE YOUR PHONE
To begin your Activation, go to TracFone.com or call 1-80
from another phone. You will need the Serial Number loca
card to complete your Activation.
To complete the Activation process, turn your phone OFF a
back ON. Then, make a call. If your call was not successful, w
minutes and repeat these steps until you are able to make a
®