Brother DCP-7030 Hızlı Kurulum Kılavuzu - Sayfa 4

Hepsi Bir Arada Yazıcı Brother DCP-7030 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother DCP-7030 18 sayfaları. Quick setup guide - spanish
Ayrıca Brother DCP-7030 için: Hızlı Kurulum Kılavuzu (20 sayfalar), Hızlı Kurulum Kılavuzu (19 sayfalar), Hızlı Kurulum Kılavuzu (32 sayfalar), Hızlı Kurulum Kılavuzu (32 sayfalar), (İngilizce) Hızlı Yapılandırma Kılavuzu (20 sayfalar)

Brother DCP-7030 Hızlı Kurulum Kılavuzu

Safety Precautions

To use the machine safely

Please keep these instructions for later reference and read them before attempting any maintenance.
Warning
Before cleaning the inside of the machine, first unplug the telephone
line cord, and then the power cord from the electrical socket.
DO NOT use any flammable substances, spray or organic
solvent/liquids containing alcohol/ammonia to clean the inside or
outside of the machine. Doing this may cause a fire or electrical
shock. Refer to Routine maintenance for how to clean the machine
in the User's Guide.
Always make sure the plug is fully inserted.
After you have just used the machine, some internal parts of the
machine will be extremely hot. When you open the front or back
cover of the machine, DO NOT touch the shaded parts shown in
the illustrations.
To prevent injuries, be careful not to put your hands on the edge of
the machine under the document cover or scanner cover as shown
in the illustrations.
To prevent injuries, DO NOT put your fingers in the area shown in
the illustrations.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside
the vacuum cleaner, potentially starting a fire. Please carefully clean the toner dust with a dry, lint-free cloth and
dispose of it according to local regulations.
If moving your machine, use the handholds provided. First making sure to disconnect any cables.
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, keep these bags away
from babies and children.
Note
The fuser unit is marked with a caution label. DO NOT
remove or damage the label.
2
DO NOT handle the plug with wet hands.
Doing this might cause an electrical shock.