Fujitsu 8432884555888 Kullanım Kılavuzu - Sayfa 8
Klima Fujitsu 8432884555888 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Fujitsu 8432884555888 16 sayfaları.
Sayfayı Yazdır■ Examples of Weekly timer
Example 1
7:00
9:00
Monday
Program
Program
1
to
On
Friday
26 °C
Wake up Leave for
work
Saturday
Sunday
Program
Off
(On)
(On)
Example 2: You can specify temperature settings using the On timer in
the Weekly timer.
7:00
9:00
Program 1
Program 2
On
On
28 °C
26 °C
6.2. On timer or Off timer
1. Select On timer or Off timer in step 2 of "Timer setting
procedure".
(
2. Press
Pressing the button: The time will change by +5/-5 minutes.
Pressing and holding the button: The time will change by +10/-10
minutes.
• To deactivate the On/Off timer, press
shown on the remote controller display.
The indicator will disappear.
6.3. Program timer
1. Set On timer and Off timer. (Refer to "6.2. On timer or Off
timer").
2. Select Program timer in step 2 of "Timer setting procedure".
The timer whose setting time is closer to the current time works first.
The order of the timer operation is displayed as follows:
Timer
Indicator on the remote controller display
On→Off timer
Off→On timer
NOTE: You can set the Program timer only within a span of 24 hours.
6.4. Sleep timer
1. Select Sleep timer in step 2 of "Timer setting procedure".
(
2. Press
stops.
Each time you press the button, the time changes as follows:
0H
1H
2H
30M
00M
00M
(30 min.)
• To deactivate the Sleep timer, press
on the remote controller display.
The indicator will disappear.
En-7
11:00
17:00
Program
2
3
Off
On
28 °C
Come back
home
(No timer settings)
Program
Program
1
2
3
Off
Off
(On)
(On)
17:00
23:00
Program 3
Program 4
On
On
27 °C
28 °C
)
to set on time or off time.
while
)
to set the time until the operation
3H
5H
7H
00M
00M
00M
while
During the Sleep timer operation, the setting temperature changes as
the following figure.
In Heating mode
23:00
1 °C 2 °C 3 °C 4 °C
Program
4
30 min
Off
1 h
1.5 h
Go to
sleep
After the set time has elapsed, the air conditioner operation turns off.
Program
4
7. ENERGY SAVING OPERATIONS
Off
7.1. Economy operation
It saves more electricity than other operation modes by changing the set
temperature to a moderate setting.
Press
)
operation.
[
] indicator on the indoor unit will turn on.
Operation
mode
Cooling/Dry
Heating
NOTES:
• In the Cooling, Heating, or Dry mode, the maximum output of this
operation is approximately 70 % of usual operation.
• This operation cannot be performed during the temperature
is
monitoring by the Auto mode.
7.2. Occupancy sensor for energy saving
• Do not use this function when there are only infants,
children, elderly, or sick persons in the room.
• Do not use this function in server rooms or other
places where there is no one in the room.
• Do not place large objects near the occupancy sensor.
Also keep heating units outside the sensor's detection
area.
When no one is in the room, the air conditioner operates moderately to
prevent waste of electricity.
(This function is activated at the time of purchase.)
To change the setting, press
)
While the Energy Saving program is activated,
remote controller display will turn on.
NOTES:
• The following operations will override the Energy Saving program.
9H
- Sleep timer operation
00M
- 10 ˚C Heat operation
hours
• The Energy Saving program may not work when the room
is shown
temperature is very different from the set temperature, such as
when immediately after starting the operation.
In Cooling or Dry mode
Set
temperature
Set time
to activate/deactivate the Economy
Room temperature
Few degrees higher than the set temperature
Few degrees lower than the set temperature
WARNING
CAUTION
Set time
1 h
1 °C
2 °C
.
on the