Fujitsu ABU36 Kullanım Kılavuzu - Sayfa 17

Klima Fujitsu ABU36 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Fujitsu ABU36 18 sayfaları. Ceiling type (60 hz)
Ayrıca Fujitsu ABU36 için: Servis Kılavuzu (20 sayfalar)

Sayfayı Yazdır
Fujitsu ABU36 Kullanım Kılavuzu
OPERATING TIPS

AUTO Restart

In Event of Power Interruption
Should the power supply to the air conditioner be inter-
rupted by a power failure, the air conditioner will restart
automatically in the previously selected mode once the
power is restored.
Should a power failure occur during TIMER operation,
the timer will be reset and the unit will begin (or stop)
operating under the new timer setting. In this event, the
TIMER indicator light (green) will flash (see page 5).

Temperature and Humidity Range

Outdoor temperature
Indoor temperature
Indoor humidity
If the air conditioner is operated under higher temperature conditions than those listed, the built-in protection circuit may
operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of
lower temperatures than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
The operation is not guaranteed under the condition where the fan blade is not lotating, or blocked by ice. If the temperature
is below 32 F, the optional separate device may be required.
Do not use this unit for any purposes other than the Cooling, (*)Heating, Dehumidifying, and air-circulation of rooms in
ordinary dwellings.
COOLING MODEL
HEAT & COOL MODEL
(Reverse Cycle)
Use of other electrical appliances (electric shaver, etc.) or
nearby use of a wireless radio transmitter may cause the
air conditioner to malfunction. In this event, temporarily
disconnect the power supply, reconnect it, and then use
the remote control unit to resume operation.
Cooling/Dry Mode
About 32 to 115 F
About 32 to 115 F
About 65 to 90 F
About 80 % or less
If the unit is used for long pe-
riods under high-humidity
conditions, condensation
may form on the surface of
the indoor unit, and drip onto
the floor or other objects un-
derneath.
*Heating Mode
—
About 32 to 75 F
About 86 F or less
—
En-17