AEG FSS62700P Kullanıcı Kılavuzu - Sayfa 12
Bulaşık Makinesi AEG FSS62700P için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG FSS62700P 24 sayfaları.
Sayfayı Yazdır
12
www.aeg.com
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start flashing and the display is
blank.
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With use
of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The XtraDry option is a permanent
option for all programmes other than
and need not to be selected at
every cycle.
Every time
option is off and needs to be chosen
manually. In other programmes, the
setting of XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
and
until
,
,
,
and
is activated, XtraDry
2. Press
.
• The indicators
are off.
• The indicator
• The display shows the current
setting:
= AirDry activated.
3. Press
to change the setting:
= AirDry deactivated.
4. Press on/off to confirm the setting.
Activating XtraDry option deactivates
TimeSaver.
How to activate XtraDry
Press
. The related indicator comes
on.
The display shows the updated
programme duration.
7.2 TimeSaver
The TimeSaver allows to reduce the time
of the selected programme.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with XtraDry
at the same time.
How to activate TimeSaver
Press
, the related indicator comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
,
,
and
still flashes.